| ausmini https://www.ausmini.com/forums/ |
|
| New front bumpers - morris https://www.ausmini.com/forums/viewtopic.php?f=2&t=31960 |
Page 1 of 1 |
| Author: | Matt68 [ Mon May 21, 2007 10:19 am ] |
| Post subject: | New front bumpers - morris |
Hi, I am looking at getting a new front bumper for my 68 morris. I was told several different things by different seller's and thought I'd ask here for clarification from those who have actually bought and used new bumpers. 
Which ones are closest to original pattern? Which ones are strongest? Who did you buy them from? |
|
| Author: | 1018cc [ Mon May 21, 2007 1:45 pm ] |
| Post subject: | |
The front bumper on my car ATM is actually from the UK. It's stainless steel. It was a real bastard to fit cause the threads on the bumper didn't quite line up with the holes in the car. A bit of gentle persuasion later and it fitted fine - needed two people though. Took it off the other day to do something and it went back on like the old bumpers that were on it - just adjusted its shape after a year or so. I actually bought it off a local guy in the mini club who personally got it imported from some place in the UK. Sorry don't know the name of the place. Overall I think it fitted pretty well. |
|
| Author: | Hanra [ Tue May 22, 2007 8:43 pm ] |
| Post subject: | |
I bought mine from Mini Kingdom a while back, Brand New Rover Stainless. They fit well, keeping in mind my front apron panel is also Rover. |
|
| Author: | drmini in aust [ Tue May 22, 2007 9:58 pm ] |
| Post subject: | |
I put 2 Rover S/S ones on mine, they fits OK in the 1970 model holes. As well as the originals did anyway. 
|
|
| Author: | Mick [ Tue May 22, 2007 10:31 pm ] |
| Post subject: | |
Used the rovers in the past, they look fantastic. I was at the time concerned with how they looked so i lined them up against the originals. They differed a little in the far ends only, they were a slightly different profile to the originals. They looked great once fitted. |
|
| Author: | Timbo [ Tue May 22, 2007 10:36 pm ] |
| Post subject: | |
There's meant to be two different shaped ends, apparently the later ones are more spoon shaped. I've used genuine Rover S/S ones but they weren't very shiny. I had to spend a while with the metal polish to get them bright enough. After that they kept their shine really well. Tim |
|
| Author: | Matt68 [ Wed May 23, 2007 9:07 am ] |
| Post subject: | |
Thanks Guys! Will start to look around now. I have been told that the 'rover' stainless items are very thin and easily damaged. Any one experienced this? Cheers, Matt |
|
| Author: | Timbo [ Wed May 23, 2007 9:51 am ] |
| Post subject: | |
Mine seemed thick enough. Certainly thicker than the originals that had lost their chrome and rusted on the back. Tim |
|
| Author: | Mike [ Wed May 23, 2007 10:07 am ] |
| Post subject: | |
The original bumpers are "crimped" at the ends, whereas the later UK ones are a straight cut. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|