| ausmini https://www.ausmini.com/forums/ |
|
| 1275 pistons https://www.ausmini.com/forums/viewtopic.php?f=2&t=32060 |
Page 1 of 1 |
| Author: | suffolk [ Thu May 24, 2007 7:30 pm ] |
| Post subject: | 1275 pistons |
anyone got a specs on 1275 piston,or have one they can take a few measurements for me??Don't know if mine are right or wrong! cheers |
|
| Author: | EST-071 [ Thu May 24, 2007 7:54 pm ] |
| Post subject: | |
I have a set of Hypatec's from Minisport SA and they measure 28.6mm from top of pin to top of piston. Cheers Pete |
|
| Author: | KLAS [ Thu May 24, 2007 8:13 pm ] |
| Post subject: | |
28.5mm top of pin bore to top of piston don't know where it is from , its marked Hepolite AE 20832A, should be 1275ccm A+ |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|