UK Mk1/2 barrels do fit into the Oz doors with conventional handles, either slider or windup..
If you buy the ignition barrel too like i did, make sure U get the same key number, mine are 1 digit off!!
| ausmini https://www.ausmini.com/forums/ |
|
| door handless https://www.ausmini.com/forums/viewtopic.php?f=2&t=32201 |
Page 1 of 1 |
| Author: | mad-mk1 [ Mon May 28, 2007 11:21 am ] |
| Post subject: | door handless |
hey i want to get new handles for my madmk1. whats the go, can u buy reproduction ones? how much? i need drivers door, passenger door and boot lock? cheers jamie |
|
| Author: | slinkey inc [ Mon May 28, 2007 5:31 pm ] |
| Post subject: | |
Wind up? If so, good drivers door handles are getting rare! Passenger seems to be alright to find. The drivers are prone to key barrel seizing, so they don't lock. Getting keys is easy, Newport motors have most if not all keys ready to be cut. To test if the lock is seized, put any key in the end, just the tip, it if can be wiggled back and forth (turned slightely) it's alright, it it's sold find another or attempt to lube it. I'm not sure how easy replacement barrels are, but the Aussie wind ups are not made new, never seen them at least. |
|
| Author: | drmini in aust [ Mon May 28, 2007 7:22 pm ] |
| Post subject: | |
UK Mk1/2 barrels do fit into the Oz doors with conventional handles, either slider or windup.. If you buy the ignition barrel too like i did, make sure U get the same key number, mine are 1 digit off!!
|
|
| Author: | Wombat [ Mon May 28, 2007 8:47 pm ] |
| Post subject: | |
drmini in aust wrote: mine are 1 digit off!!
Can't you extract the digit Kev? |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|