ausmini
https://www.ausmini.com/forums/

Rust in Floors
https://www.ausmini.com/forums/viewtopic.php?f=2&t=32803		 Page 1 of 1
Author:  dtorreal [ Wed Jun 13, 2007 11:49 am ]
Post subject:  Rust in Floors
Hey Guys

So i finnaly got my mini yet i have noticed i have a big job ahead with the rust in the floors.
I have rust in every floor and reasonably extensive so i will have to definately get them replaced.
Some questions i have

1) How hard is it to fix front, back and boot floor and also foot well, the place between the inner and outer sill where the door sits on.

2) I have a mig welder would this be OK for the job.?

3) I also have some rust behind the front wheels right where the A frame meets the firewall. Has anybody worked on these areas?

Anywy willing to send it to somebody to work on it as i want the car to be done properly yet if the work is easy to do will be willing to do it myself.

Thanks guys
Author:  9YaTaH [ Wed Jun 13, 2007 12:54 pm ]
Post subject:  Re: Rust in Floors
"dtorreal"

Hey Guys

So i finnaly got my mini yet i have noticed i have a big job ahead with the rust in the floors.
I have rust in every floor and reasonably extensive so i will have to definately get them replaced.
Some questions i have

1) How hard is it to fix front, back and boot floor and also foot well, the place between the inner and outer sill where the door sits on....not hard if you have welding skills as replacement panels are available (new)

2) I have a mig welder would this be OK for the job.?...ideal

3) I also have some rust behind the front wheels right where the A frame meets the firewall. Has anybody worked on these areas? Yes..very common in Minis....just keep cutting it out and repairing :D

Anywy willing to send it to somebody to work on it as i want the car to be done properly yet if the work is easy to do will be willing to do it myself....Mick at Melba Motors can do rust repairs or if you are not in a hurry there are places like Hughes Bros out at Bungendore...tried the local TAFE???

Thanks guys
Author:  dtorreal [ Wed Jun 13, 2007 2:22 pm ]
Post subject: 
Really the local TAFE (CIT).

OK My non existant skills on the welder are not that great and i would like to do a good job on the body.

I guess i would look at going to one of these guys. Do you think it would a good option to buy the panels prior to going out there for them to weld it on the car?

I would be getting the panels from Classic Motoring out at Fyshwick.
Author:  9YaTaH [ Wed Jun 13, 2007 2:27 pm ]
Post subject:  Yep
quote="dtorreal"

Really the local TAFE (CIT)....Yes, really, it can be hard to do but talk to the Automotive Trades head teach

OK My non existant skills on the welder are not that great and i would like to do a good job on the body....so welding course at the TAFE first

I guess i would look at going to one of these guys. Do you think it would a good option to buy the panels prior to going out there for them to weld it on the car? No I don't, panel guys will know what you need to buy and what is repairable without replacement panels
I would be getting the panels from Classic Motoring out at Fyshwick...thats one place :D

PM sent....
Author:  dtorreal [ Wed Jun 13, 2007 2:55 pm ]
Post subject: 
The Only Place?

Will you be going to the ACTMCC meeting next week?
Author:  9YaTaH [ Wed Jun 13, 2007 2:57 pm ]
Post subject:  Yep
dtorreal wrote:
The Only Place?

Will you be going to the ACTMCC meeting next week?


Yep.
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/