| ausmini https://www.ausmini.com/forums/ |
|
| Can you? https://www.ausmini.com/forums/viewtopic.php?f=2&t=3310 |
Page 1 of 2 |
| Author: | Toddles [ Tue Dec 07, 2004 1:09 pm ] |
| Post subject: | Can you? |
You know how you can get all those nice chrome door handles and window winders for UK minis. Would they fit on auzzie ones? Clubmans in particular. or is there any others that you can get that are the same sort of deal but do fit? Basically want window winders as the bastards seem to snap every so often. |
|
| Author: | J_A_M [ Tue Dec 07, 2004 1:15 pm ] |
| Post subject: | |
If you want metal ones to fit a mini, take one of yours to a wrecker and find another car with the same fitting, but in metal. From memory it needs to have a square hole in the winder, to slide onto the mechanism. |
|
| Author: | 1380 yellow devil [ Tue Dec 07, 2004 1:25 pm ] |
| Post subject: | |
Thats right they have a square hole not round |
|
| Author: | Toddles [ Tue Dec 07, 2004 1:46 pm ] |
| Post subject: | |
You could spend a week searching every single car in the wrecker to find the right one. So does anyone have any idea of what cars would have the right stuff? Aren't the shafts square with rounded edges? The hole is too isn't it? So if it was just square wouldn't it slip a little in the hole if the shaft was a little small and if it was too big then wouldn't it just not fit? Maybe mine are just worn, but I thought they were square with rounded edges. Anyone got some good window winders off another car that are good? For a Clubby |
|
| Author: | 1380 yellow devil [ Tue Dec 07, 2004 1:50 pm ] |
| Post subject: | |
Just remembered that a Mate of mine got me a set of universal Winder handles in Alloy form Repco and they have a Square fitting jig. |
|
| Author: | J_A_M [ Tue Dec 07, 2004 1:58 pm ] |
| Post subject: | |
I am going to try it out here in a Syd wrecker. I will check all 70's cars for a start. It can't be that uncommon...... |
|
| Author: | 1380 yellow devil [ Tue Dec 07, 2004 2:05 pm ] |
| Post subject: | |
I have never done the wrecker thing but lett us know |
|
| Author: | bnicho [ Tue Dec 07, 2004 4:34 pm ] |
| Post subject: | |
Some Morris 1100 or variants had the same shape window and door handles as a Mini in CHROMED METAL. Fits straight on. Rumour is that it was for a few months of production or some special model only (Vanden Plas, MG, Riley, Wolseley?). I've only ever seen two sets. 
|
|
| Author: | Toddles [ Tue Dec 07, 2004 4:42 pm ] |
| Post subject: | |
Why does everything good that might help out always have to be put on special things that make it as hard as crap to find. Probably send the price up a bit as well. Let us all know how you go at the wreckers Jam. I might have to go check out repco as well and see if they have any good ones that will fit and not look poxy. Just hate having the plastic ones snap...can hurt quiet a lot when you stab yourself on one of them. |
|
| Author: | drmini in aust [ Tue Dec 07, 2004 6:54 pm ] |
| Post subject: | |
My Mini has a set of the Chromed metal ones. I painted them black- too much Bling... 
They used to be quite common. |
|
| Author: | ausminis4u [ Wed Dec 08, 2004 8:44 am ] |
| Post subject: | |
i have morris minor chromed ones :d look sweet and no one else seems to use them. the window winders will fit all aussie built minis and the door release handle will fit all pre clubman doors 
|
|
| Author: | 1380 yellow devil [ Wed Dec 08, 2004 10:22 am ] |
| Post subject: | |
Well I will have to and try and get some morris ones then |
|
| Author: | cush [ Wed Dec 08, 2004 12:39 pm ] |
| Post subject: | |
i got no windows to wind.. easy...
|
|
| Author: | Toddles [ Wed Dec 08, 2004 1:02 pm ] |
| Post subject: | |
So what do these morris minor ones look like? can't say I have ever seen them before. Don't happen to know what year/model they come off? Only want the winders so that won't add much bling at all. At least they won't snap...well they shouldn't. |
|
| Author: | Hanra [ Wed Dec 08, 2004 1:48 pm ] |
| Post subject: | |
I bought a complete set of winders and door openers from Mini Spares I think, they seem like they are machined out of stainless, quite good quality. They werent cheap though, cost me $400 for the set of 4. Have the square fitting so the fit straighto onto minis, the winders are 3 seperate pieces, the openers are 2 pieces, screwed together with allen keys. |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|