Damn I thought this thread was gonna be about me
| ausmini https://www.ausmini.com/forums/ |
|
| Tools https://www.ausmini.com/forums/viewtopic.php?f=2&t=33268 |
Page 1 of 1 |
| Author: | Smarty [ Mon Jun 25, 2007 8:53 pm ] |
| Post subject: | Tools |
okay so I have most tools but am looking at buying the following, Dial Gauge Torque Wrench What does everyone recommend? Metric or imperial and which brand, size scales etc?? |
|
| Author: | mr_a_series [ Mon Jun 25, 2007 8:57 pm ] |
| Post subject: | |
on the subject of tools i have a 73 clubby. and id like to make up a in car tool kit? any sugestions ... and also any important spares.... ty |
|
| Author: | doogie [ Mon Jun 25, 2007 9:06 pm ] |
| Post subject: | |
for a mini minimum tools you need to carry in the car, are 3/8 7/16 1/2 9/16 11/16 3/4 spanners, flat blade & phillips screw driver, pliers, hammer & can of WD40 For your garage, buy a decent set of imperial spanner & sockets, flywheel puller the 2 big sockets needed for hub nuts & flywheel bolts, good quality trolley jack, 2 or even 4 quality axle stands smallish comperessor & a rattle gun. Doogie |
|
| Author: | willy [ Mon Jun 25, 2007 9:38 pm ] |
| Post subject: | |
Damn I thought this thread was gonna be about me
|
|
| Author: | Smarty [ Mon Jun 25, 2007 10:13 pm ] |
| Post subject: | |
nope not about you willy hehe just need some advice on which dial gauge to buy is all and torque wrench.... |
|
| Author: | AEG163job [ Tue Jun 26, 2007 10:58 am ] |
| Post subject: | |
Torque wrench - recommend Warren & Brown, made in Oz, model 323500 1/2" drive range 20-200ft lbs. Pricey, but accurate (so long as you don't let your "friends" borrow it  )
Dial guages - previous threads have covered this. |
|
| Author: | Lillee [ Tue Jun 26, 2007 11:01 am ] |
| Post subject: | |
Any bendy bar torque wrench with a brand name is good for home use. I have no problems with my Craftman one I bought for USD$24 from Sears 
|
|
| Author: | Smarty [ Tue Jun 26, 2007 11:50 am ] |
| Post subject: | |
Quote: Dial guages - previous threads have covered this.AEG163job
I thought they had but I have been unable to find with a search, any idea which thread they were in?? |
|
| Author: | speedy [ Tue Jun 26, 2007 12:27 pm ] |
| Post subject: | |
Try this one http://www.ausmini.com/forums/viewtopic ... ial+gauges |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|