ausmini https://www.ausmini.com/forums/ |
|
Clubman wiper switch - Sorted https://www.ausmini.com/forums/viewtopic.php?f=2&t=33435 |
Page 1 of 1 |
Author: | d1ck0 [ Sun Jul 01, 2007 8:21 am ] |
Post subject: | Clubman wiper switch - Sorted |
Hi there, I have been helping my Son with his Clubman, and he had removed the switch panel and disconnected all of the wiring. i have sussed everything out except the Wiper switch. Can anybody assist with either: a) Details of which wires go to which contact. The contacts are numbered 1,2, 4, & 5 etc. b) A copy of an Australian Wiring Diagram (77 Clubman) as the OS ones are different. Any help much appreciated. Cheers. Dicko. |
Author: | d1ck0 [ Sun Jul 01, 2007 5:46 pm ] |
Post subject: | |
Any of you clubman owners wanna pull your switch panel out and have a look? Please...... It's the last thing I need to fix before rego. Thanks, Dicko. |
Author: | lil-ute [ Sun Jul 01, 2007 5:50 pm ] |
Post subject: | |
send wombat a pm and buy his disc it has everything and will help alot |
Author: | d1ck0 [ Sun Jul 01, 2007 5:52 pm ] |
Post subject: | |
alsminik wrote: send wombat a pm and buy his disc it has everything and will help alot
Done that, cant see later Aussie Clubman stuff there though. |
Author: | lil-ute [ Sun Jul 01, 2007 5:54 pm ] |
Post subject: | |
try this http://www.mgb-stuff.org.uk/wiper4.htm |
Author: | Smokie [ Sun Jul 01, 2007 6:05 pm ] |
Post subject: | |
Sorry I can't help you d1ck0, had mine done by an autolec.. |
Author: | d1ck0 [ Sun Jul 01, 2007 6:17 pm ] |
Post subject: | |
alsminik wrote:
Not the same unfortunately. This site says The rocker/toggle switches have pins 1 3 5 and 7 connected together internally. In the off position contacts 1 2 (park brown/light-green) 5 and 6 (slow red/light-green) are connected together. In the slow position contacts 3 4 (12v green) 5 and 6 (red/light-green) are connected together and in the fast position contacts 3 4 (12v green) 7 and 8 (blue/light-green) are connected together. On a Clubman rocker switch there are pins 1,2,4,and 5. In the off position pins 4 and 5 are bridged. In low speed position its 2 & 1 that are bridged and in hogh speed its 2 & 4. Thanks anyway. Dicko. |
Author: | 64cooper [ Sun Jul 01, 2007 8:04 pm ] |
Post subject: | |
When did you get your disc from Wombat? If in the earlier batch, you are quite right, it can't help you. I copied all the Australian supplement (including your required wiring diagram) and passed it on to Wombat for inclusion on any future requests for discs. If you need a copy PM me with some address details and I will post a copy of the Australian Supplement. David |
Author: | d1ck0 [ Tue Jul 03, 2007 4:47 pm ] |
Post subject: | |
Got it sorted, bought a Leyland Gen Workshop Manual off Ebay. Pin outs are as follows: Pin 1 - Black/Green Pin 2 - Black Pin 4 - Red/Light Green Pin 5 - Blue/Light Green Cheers, Dicko. ![]() |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |