Ausmini
It is currently Mon Aug 04, 2025 11:17 pm

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 3
  [ 40 posts ]  Go to page 1, 2, 3  Next
  Print view Previous topic | Next topic 
Author Message
speedy
PostPosted: Thu May 17, 2007 6:09 pm 
Offline
Slow-Po
User avatar

Joined: Fri Jul 08, 2005 8:56 pm
Posts: 9979
Anybody used the following, plugs into the standard dizzy. Change over the button and redo the timing, presto, electronic ignition.

Image

Image

_________________
One should never skimp on the zip ties.

Image
Top
 Profile  
 
Hanra
 Post subject:
PostPosted: Thu May 17, 2007 6:30 pm 
Offline
1360cc
1360cc
User avatar

Joined: Sat May 08, 2004 9:01 pm
Posts: 6844
Location: Cairns, Nrth QLD
Thats all my Petronix kit is, mount the module to the base plate, fit a magnetic pickup on the shaft, refit the button. All done. 2 wires to pos/neg on coil.

_________________
Image
http://www.youtube.com/user/Hanras
Top
 Profile  
 
speedy
 Post subject:
PostPosted: Thu May 17, 2007 6:34 pm 
Offline
Slow-Po
User avatar

Joined: Fri Jul 08, 2005 8:56 pm
Posts: 9979
8) , I thought there was more to it. This one just requires the module to be fitted along with the button that comes as part of the kit.

_________________
One should never skimp on the zip ties.

Image
Top
 Profile  
 
Hanra
 Post subject:
PostPosted: Thu May 17, 2007 6:38 pm 
Offline
1360cc
1360cc
User avatar

Joined: Sat May 08, 2004 9:01 pm
Posts: 6844
Location: Cairns, Nrth QLD
Nope, it dosnt get any easier! Its just a magnetic pickup on the shaft, and the module which amplifies the magnetic pulse into a square wave of some sort, then this supplys a gnd to the coil to discharge it, to generate the back EMF into the secondary winding of the coil to generate HT.

_________________
Image
http://www.youtube.com/user/Hanras
Top
 Profile  
 
speedy
 Post subject:
PostPosted: Thu May 17, 2007 6:44 pm 
Offline
Slow-Po
User avatar

Joined: Fri Jul 08, 2005 8:56 pm
Posts: 9979
Out of curiosity, how much does the Petronix one retail for?

_________________
One should never skimp on the zip ties.

Image
Top
 Profile  
 
willy
 Post subject:
PostPosted: Thu May 17, 2007 6:45 pm 
Offline
1360cc
1360cc

Joined: Mon May 03, 2004 6:46 pm
Posts: 13688
Location: ADL
$185
Top
 Profile  
 
Hanra
 Post subject:
PostPosted: Thu May 17, 2007 6:47 pm 
Offline
1360cc
1360cc
User avatar

Joined: Sat May 08, 2004 9:01 pm
Posts: 6844
Location: Cairns, Nrth QLD
I got mine from the US for 70 USD. inc frieght. It fitted my 29D Lucas Dizzy!

_________________
Image
http://www.youtube.com/user/Hanras
Top
 Profile  
 
willy
 Post subject:
PostPosted: Thu May 17, 2007 6:48 pm 
Offline
1360cc
1360cc

Joined: Mon May 03, 2004 6:46 pm
Posts: 13688
Location: ADL
New? :shock:

Where from?
Top
 Profile  
 
Hanra
 Post subject:
PostPosted: Thu May 17, 2007 6:50 pm 
Offline
1360cc
1360cc
User avatar

Joined: Sat May 08, 2004 9:01 pm
Posts: 6844
Location: Cairns, Nrth QLD
Yeah brand spanking, LU-142A. Gimmie a sec n ill see if i can find a docket.

_________________
Image
http://www.youtube.com/user/Hanras
Top
 Profile  
 
Hanra
 Post subject:
PostPosted: Thu May 17, 2007 6:58 pm 
Offline
1360cc
1360cc
User avatar

Joined: Sat May 08, 2004 9:01 pm
Posts: 6844
Location: Cairns, Nrth QLD
http://www.warehouseautoparts.com/store/page29.html

LU-142A $63.95 plus freight.

_________________
Image
http://www.youtube.com/user/Hanras
Top
 Profile  
 
willy
 Post subject:
PostPosted: Thu May 17, 2007 7:03 pm 
Offline
1360cc
1360cc

Joined: Mon May 03, 2004 6:46 pm
Posts: 13688
Location: ADL
Crikeys!
Out comes the credit card 8)
Top
 Profile  
 
Blokeinamoke
 Post subject:
PostPosted: Thu May 17, 2007 7:18 pm 
Offline
1360cc
1360cc

Joined: Mon Jan 16, 2006 7:59 pm
Posts: 11749
Your nails are putrid
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Thu May 17, 2007 7:29 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39763
Location: near Baulkham Hills, NSW
I got mine from here a while back-
http://www.vintageperformance.com/retro ... /lucas.htm
:wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
gerg
 Post subject:
PostPosted: Thu May 17, 2007 8:41 pm 
Offline
The Forkmeister
User avatar

Joined: Sun Sep 17, 2006 3:33 pm
Posts: 1029
Location: camden
I Brought one from John at the mini king yesterday, and his mech, Glen, is going to fit it on saturday morning, he has been running it in his van for a couple of weeks and he loves it.... :D

_________________
Image
May the fork be with you.
Top
 Profile  
 
Gilly
 Post subject:
PostPosted: Thu May 17, 2007 8:41 pm 
Offline
998cc
998cc
User avatar

Joined: Tue Jun 07, 2005 9:34 pm
Posts: 536
Location: In Your Roof
How much is the postage for the item if you can recall?
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 3
  [ 40 posts ]  Go to page 1, 2, 3  Next

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 71 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.