Can you use 32 or 33mm chokes in a Weber 45 DCOE or does it have to be
a 40 DCOE.
| ausmini https://www.ausmini.com/forums/ |
|
| Weber Chokes https://www.ausmini.com/forums/viewtopic.php?f=2&t=33476 |
Page 1 of 1 |
| Author: | morgan [ Mon Jul 02, 2007 12:43 pm ] |
| Post subject: | Weber Chokes |
Can you use 32 or 33mm chokes in a Weber 45 DCOE or does it have to be a 40 DCOE.
|
|
| Author: | Anto [ Mon Jul 02, 2007 12:57 pm ] |
| Post subject: | |
45DCOE requires 45DCOE chokes and 40DCOE requires 40DCOE chokes, but the sizes do overlap (ie you can have a 45DCOE with 34mm chokes and you can have a 40DCOE with 34mm chokes) |
|
| Author: | Curly [ Mon Jul 02, 2007 5:23 pm ] |
| Post subject: | |
You can get 32mm chokes for a 45DCOE, I run this set up on my 998cc Bugeye Sprite. If you want 33mm chokes I think you'll have to start with a pair of 32's and machine them down. Standard sizes seem to go up in 2mm steps. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|