My clubbie had a centre speedo....previous owner did some odd mods.
I mounted my tacho like this -
Tacho was pure rice...as was the 4" cannon and purple furred back seat.
| ausmini https://www.ausmini.com/forums/ |
|
| mouting points for tacho's in clubbies https://www.ausmini.com/forums/viewtopic.php?f=2&t=33551 |
Page 1 of 1 |
| Author: | czerial [ Wed Jul 04, 2007 6:09 pm ] |
| Post subject: | mouting points for tacho's in clubbies |
I have decided on the tacho to get, but what i am after is a spot to mount it. I am thinking that it will go in the little open part of the dash between the gauges and the a piller (clubby owners will recognise this as the spot that their phones usually go.... can anyone think of somewhere else to mount it, as its drastically out of sight there. everywhere else just looks crudskies. pics would help also thanks a zillion chris |
|
| Author: | minidrifter [ Wed Jul 04, 2007 6:15 pm ] |
| Post subject: | |
ive seen one in penrith that has it mounted in front of the heater but pointing towards the driver, that doesnt look too bad, but i didnt have my camera with me so i didnt take any pics. |
|
| Author: | ryan [ Wed Jul 04, 2007 6:27 pm ] |
| Post subject: | |
Chris, can you give us photos of your dash, and the gauge you chose, then we can help a bit better. Ryan |
|
| Author: | lil-ute [ Wed Jul 04, 2007 7:00 pm ] |
| Post subject: | |
i have a three clock dash if you want to spend time and put it in pm if you are interested |
|
| Author: | Maxi23 [ Wed Jul 04, 2007 7:05 pm ] |
| Post subject: | |
My clubbie had a centre speedo....previous owner did some odd mods. I mounted my tacho like this -
Tacho was pure rice...as was the 4" cannon and purple furred back seat. |
|
| Author: | Drewus [ Wed Jul 04, 2007 9:46 pm ] |
| Post subject: | |
I have mine hanging from the top rim of the parcel shelf above the steering wheel, so i only need to look down to see it. It's small and simple, so it doesn't get in the way or look silly. |
|
| Author: | czerial [ Wed Jul 04, 2007 9:54 pm ] |
| Post subject: | |
http://www.siemensvdo.com/products_solu ... ometer.htm thats the tacho, and the dash is just a standard 3 pod clubby instrument cluster, and it has a standard radio unit. |
|
| Author: | gafmo [ Wed Jul 04, 2007 9:58 pm ] |
| Post subject: | |
Idle's High and the Fluff is not my style but each to their own. I like that one Chris..and just to 8,000 also PM me please |
|
| Author: | pristic [ Thu Jul 05, 2007 11:36 am ] |
| Post subject: | |
Chris, I have 3 guages in my clubbie (its a 3 cluster like yours) I have 2 in the radio housing thing (removed the speaker) and on on the right (to the right of the original tacho) That one is MOST visible... and there is heaps of room. Peter |
|
| Author: | czerial [ Thu Jul 05, 2007 1:20 pm ] |
| Post subject: | |
thanks pete, thats good news, thats where i wanted to mount mine, wasnt sure on the visibility but that is good. so u have it mounted directkly next to the original tacho? or up a bit? |
|
| Author: | pristic [ Thu Jul 05, 2007 1:40 pm ] |
| Post subject: | |
I dont have the tacho there, I have another guage there... but I look ALL the time (just think blown welsch plugs hehe) Its mounted on an angle facing driver and tilted up a little... just glance down and you can see it clearly. I would keep it as far to the right as possible... Peter. PS: All of mine will be coming out soon... and ill be mounting the aftermarket tacho there (exactly where the other guage is) |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|