ausmini
https://www.ausmini.com/forums/

CAM question ??
https://www.ausmini.com/forums/viewtopic.php?f=2&t=33665		 Page 1 of 1
Author:  matt850 [ Sun Jul 08, 2007 1:04 pm ]
Post subject:  CAM question ??
My new cam has no keyway on it ! Just a slot where the keyway should be. Whats the deal ??
Author:  Mick [ Sun Jul 08, 2007 2:46 pm ]
Post subject: 
There's a key that will sit in the slot.
It sounds like it is simply missing.
Author:  matt850 [ Sun Jul 08, 2007 2:49 pm ]
Post subject: 
would it have been removed when I had the cam ground ?
Author:  Mick [ Sun Jul 08, 2007 3:13 pm ]
Post subject: 
Most likely, easy to replace. You will find them in other cams, or you can usually get one from from a grab kit. Don't know the length exactly (9/16 or 5/8 ) but it is a 3/16 wide woodruff (half moon) key.
The cam place will have them in spades.
Author:  gerg [ Sun Jul 08, 2007 4:29 pm ]
Post subject: 
Yeh, Matt, i agree with what Mick said, give John or maybe even Graham a call they should be able to help you.

Gerg

P.s sorry i missed your call.... :oops: I usually have my phone with me all the time....
Author:  matt850 [ Sun Jul 08, 2007 6:00 pm ]
Post subject: 
you didnt answer your phone because you wanted to listen to your new ringtone.....c'mon tell the truth.
Author:  drmini in aust [ Sun Jul 08, 2007 6:31 pm ]
Post subject: 
PM replied. As said above it's a `woodruff' key, semi-circular. :wink:
Author:  matt850 [ Sun Jul 08, 2007 6:44 pm ]
Post subject: 
You just gotta love the help you get through this site. The knowledge that some of you people possess is nothing short of astounding.
Thanks
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/