alsminik wrote:
send morris 1275 a pm he will know
Failing that....Morris1100 is sure to know
| ausmini https://www.ausmini.com/forums/ |
|
| New block https://www.ausmini.com/forums/viewtopic.php?f=2&t=33827 |
Page 1 of 1 |
| Author: | Clubbie74 [ Fri Jul 13, 2007 5:46 pm ] |
| Post subject: | New block |
Looking at doing up a 1275 engine and have found a brand new 12G1279 block and was wondering what it is from and whether it is worth using a new block over a used one. I would have thought it wouldn't matter either way unless I wanted standard 1275 size bores but is there anything else to consider? Google says it might be a Morris 1300GT??? Its about $700 so not sure which way to go. |
|
| Author: | lil-ute [ Fri Jul 13, 2007 6:48 pm ] |
| Post subject: | |
send morris 1275 a pm he will know |
|
| Author: | 9YaTaH [ Fri Jul 13, 2007 7:26 pm ] |
| Post subject: | Mike |
alsminik wrote: send morris 1275 a pm he will know
Failing that....Morris1100 is sure to know
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|