| ausmini https://www.ausmini.com/forums/ |
|
| Question on the Moke https://www.ausmini.com/forums/viewtopic.php?f=2&t=34262 |
Page 1 of 1 |
| Author: | Wombat [ Sat Jul 28, 2007 11:49 am ] |
| Post subject: | Question on the Moke |
There is a Modification Certification plate fixed on the firewall under the dash stating the car has been subject to a modification "Code LK1" Anyone know what that would be? Could it be the front suspension? Have a look at this photo - you will see on the front fender a rectangular protrusion that is one with a large steel plate bolted to the underside of the fender. The hollow protrusion is directly above the shock absorber but the current suspension appears to be original and not modified. 
|
|
| Author: | bnicho [ Sat Jul 28, 2007 1:06 pm ] |
| Post subject: | |
LK1 Means a rear seat conversion on a QLD Transport Blue Modification plate. Someone's gone to the trouble of getting an enginerr to certify a rear seat. I reckon it's ex-rental, as they seem to be careful about that sort of thing. The plate should still say who did the mod. I bet it's something like Cairns Rent A Car. 
|
|
| Author: | Wombat [ Sat Jul 28, 2007 5:26 pm ] |
| Post subject: | |
bnicho wrote: LK1 Means a rear seat conversion on a QLD Transport Blue Modification plate. No - Minter Motors Yeppoon - still there so I'll give them a call Monday and see if they have any history Someone's gone to the trouble of getting an enginerr to certify a rear seat. I reckon it's ex-rental, as they seem to be careful about that sort of thing. The plate should still say who did the mod. I bet it's something like Cairns Rent A Car. 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|