ausmini
https://www.ausmini.com/forums/

How do I find out what ADRs applied
https://www.ausmini.com/forums/viewtopic.php?f=2&t=34374		 Page 1 of 2
Author:  Wombat [ Wed Aug 01, 2007 9:05 am ]
Post subject:  How do I find out what ADRs applied
in May 1978? - In rebuilding the Moke to I have to add all the anti polution plumbing? What else would be applicable ?
Author:  doogie [ Wed Aug 01, 2007 9:07 am ]
Post subject: 
To get it re registed it should have all the pollution gear on it, but saying that, not many rego inspectors out there would be aware of it.

Doogie
Author:  min13k [ Wed Aug 01, 2007 9:29 am ]
Post subject: 
i had a 77 clubby all the pollution stup was there just not hocked up
makka
Author:  Blokeinamoke [ Wed Aug 01, 2007 9:53 am ]
Post subject: 
It should all be on the compliance plate - it should tell you what regs apply to yours
Author:  Wombat [ Wed Aug 01, 2007 10:46 am ]
Post subject: 
Blokeinamoke wrote:
It should all be on the compliance plate - it should tell you what regs apply to yours


Duh! Thanks Bloke - Just saw this massive great number and ignored it - didn't realise until I looked at it closely it was a list of the ADRs
What is the very first line on the plate - I only have a photo of the plate and the car is in Rocky.

Image
Author:  Timbo [ Wed Aug 01, 2007 11:39 am ]
Post subject: 
This is a list of the ADRs off the compliance plate of a 10/78 Moke. Its off Terry Pollard's Australian Moke Register.

1-3-4C-5B-6-7-8-11-12-14-15 16-20-22A-23-24-25A-28

Tim
Author:  Wombat [ Wed Aug 01, 2007 11:44 am ]
Post subject: 
Just looked them up - nothing about emmission or exhaust gas control YAH!! ( that is all in the 30's)
Author:  850man [ Wed Aug 01, 2007 1:48 pm ]
Post subject: 
ADR No 27A is the pollution fitted cars, i think it was superseided by No. 28 in late 78.
Author:  Wombat [ Wed Aug 01, 2007 2:03 pm ]
Post subject: 
According the the ADR website # 28 is External Noise (if I read it right).

http://www.dotars.gov.au/roads/motor/design/adr_online.aspx
Author:  d1ck0 [ Wed Aug 01, 2007 7:52 pm ]
Post subject: 
If I recall correctly.....ADR27A was emmision control for passenger cars, but for Comercial vehicles (mokes still being utes then??) they werent as strict with emmisions at first. Passenger cars were first to be regulated, commercials came in a bit later, and were very different regulations at the time.
Author:  Wombat [ Thu Aug 02, 2007 12:44 pm ]
Post subject: 
OK to resolve all confusion I have just ordered a copy of the ADR CD that has the 2nd edition ADRs on it - that covers all cars made up to 1989.

Anyone interested :wink: :wink: say no more
Author:  Blokeinamoke [ Thu Aug 02, 2007 1:10 pm ]
Post subject: 
I am getting mine inspected as a commercial as no ADR applied to commercial vehicles in 1971 (the year of mine). After its regod the back seats go back in
Author:  TasTyger [ Thu Aug 02, 2007 1:54 pm ]
Post subject: 
Not sure if I've got this right but I think most mokes got away with just the black cannister plumbed in. Most were registered as "Utility" - my 1980 one still is - and because that was a commercial vehicle it didn't have to meet the other criteria that most mini with anti -pollution gear on them.

Though that may not apply in your situation Wombat if theres no pollution met ADR on the compliance plate...

TasTyger :)
Author:  sports850 [ Thu Aug 02, 2007 1:57 pm ]
Post subject: 
Same here , my 1981 Moke has the charcoal canister and that's it . It's a 2 seat 1275 Californian so i guess is still classed as a commercial .
Author:  Wombat [ Thu Aug 02, 2007 2:03 pm ]
Post subject: 
sports850 wrote:
Same here , my 1981 Moke has the charcoal canister and that's it . It's a 2 seat 1275 Californian so i guess is still classed as a commercial .


Mine's been engineered as a 4 seater - plated and all - guess that makes in Non-commercial :?
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/