I have seen a coulple of times on this forum, people referring to a pulsar dizzy. Firstly what do they do different?, and is it worth fitting one to my 1275?, if so how much are they, what mods are needed and how do you do it?

Steve.

There's lots of good reasons to install an electronic dizzy:

No points to wear/adjust.
Better wet weather performance.
Much better spark.
...

If you do a search on this site you'll find all the infomation you'll need. Go here to see how to do the mod.

I paid 35 for mine not including the coil which you'll need (unless you already have a Bosch GT40R).

Now lets just let this thread slide off the front page.....

dewey

_________________
dwightgunning.com

There`s allready a very good thread about pulsar dizzys

have a look & a read of it,,,They are good in that you won`t have to go fitting points anymore

_________________
No offence intended here but--> anyone writing a book about minis 30 years ago may not have experienced such worn or stuffed-with components as we are finding these days.

You should put your heart & soul into everything you do.

What type am I looking for, as I will ring around the local wreckers yards? Also where is this thread, can anyone post a link!


Thanks, steve.

Its in Dewey...click on HERE

_________________
Stop Licking the Dog...I Don't Care Who Started It

Here- http://ausmini.tziworld.com/viewtopic.php?t=1498

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.