| ausmini https://www.ausmini.com/forums/ |
|
| just bought a 67 roundnose & have some questions https://www.ausmini.com/forums/viewtopic.php?f=2&t=34575 |
Page 1 of 1 |
| Author: | cd [ Tue Aug 07, 2007 3:43 pm ] |
| Post subject: | just bought a 67 roundnose & have some questions |
Always loved minis. Great website with lots of info & tongue in cheek humour. 
Just bought a 67 round nose & have some questions. I live in West Pennant Hills,Sydney. Is there someone nearby I could talk to, ask some questions? Is it 67 model? YMA2S41258 I found out 2S4 is minimatic but it has a manual fitted. Is it rod or wand change? How can I tell? Eng no is M86814P, is it a 998? Seal kits for brake MC & WC where can I get them from? Repco or a brake place? Thanks Craig |
|
| Author: | doogie [ Tue Aug 07, 2007 3:49 pm ] |
| Post subject: | |
If you have to lift the gear knob to select reverse, its a rod change box, if the gearlever comes out of the base of the firewall, it's a magic wand shift. Go and see Greig at Mini Classic Hope st Ermington, he can tell you anything you need to know & can help out with parts & repairs. Doogie PS Enjoy your mini. |
|
| Author: | cd [ Tue Aug 07, 2007 4:07 pm ] |
| Post subject: | |
Thanks for the reply Doogie. Much appreciated. |
|
| Author: | 9YaTaH [ Tue Aug 07, 2007 4:32 pm ] |
| Post subject: | 1967 |
Eng no is M86814P, is it a 998? looks like a Police number, not that uncommon....have you looked for the aluminium tag at the back of the block/right hand side??? put up some pictures of the engine and we can probably tell you more Welcome
|
|
| Author: | cd [ Tue Aug 07, 2007 6:08 pm ] |
| Post subject: | |
Sorry 9YaTaH, cant put in photo of eng. Not real good with computers & only new to this site.Craig |
|
| Author: | speedy [ Tue Aug 07, 2007 6:37 pm ] |
| Post subject: | |
Another Mini in the Hills district?! I tell you that they must be giving minis away just for parking at Castle Towers!
Congratulations on the car. |
|
| Author: | 9YaTaH [ Tue Aug 07, 2007 10:02 pm ] |
| Post subject: | Hills |
cd wrote: Sorry 9YaTaH, cant put in photo of eng. Not real good with computers & only new to this site.Craig
Well....email your photos to one of your 400 Hills Mini mates and let them post your pics
|
|
| Author: | gafmo [ Tue Aug 07, 2007 10:18 pm ] |
| Post subject: | |
We could start our own club up here Craig I would also recomend Grieg at Mini Classic Hope St Ermington specialy as he's close by But us hills peopel are also good for a chat. |
|
| Author: | gafmo [ Sat Aug 11, 2007 9:01 pm ] |
| Post subject: | |
Sorry for the Delay brain freeze.. 
|
|
| Author: | simon k [ Sat Aug 11, 2007 9:22 pm ] |
| Post subject: | |
looks familiar!! grubby
get that electric fuel pump put under the rear subframe, must be bloody noisy sitting up there, mount the coil the other way up so it has less chance of getting wet and reroute that wire to the temperature gauge sender so it doesn't get snagged on the fan belt the motor isn't a 1275, so it's either an 848, 997, 998 or 1098, can't tell which one without measuring the stroke
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|