ausmini https://www.ausmini.com/forums/ |
|
Quick fuel hose question... https://www.ausmini.com/forums/viewtopic.php?f=2&t=34734 |
Page 1 of 1 |
Author: | poeee [ Sun Aug 12, 2007 1:47 pm ] |
Post subject: | Quick fuel hose question... |
What size is it at the back out of the tank (under the car, installing a leccy pump) and what size is it under the bonnet? |
Author: | matt van'74 [ Sun Aug 12, 2007 1:50 pm ] |
Post subject: | |
1/4" Fuel Hose I reckon. Matt |
Author: | drmini in aust [ Sun Aug 12, 2007 5:37 pm ] |
Post subject: | |
The steel pipe front to back is 1/4" OD (outside diameter). If fitting a bigass motor and pipe dodgy I'd suggest replace with 5/16". However, my 1360 gets by with the original 1/4" line and a Facet electric pump, and it's got somewhat more than 120HP at the crank... ![]() |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |