| ausmini https://www.ausmini.com/forums/ |
|
| 13 x 8 Inch Tyres - In Australia https://www.ausmini.com/forums/viewtopic.php?f=2&t=3476 |
Page 1 of 1 |
| Author: | YellowDevil [ Wed Dec 15, 2004 8:58 pm ] |
| Post subject: | 13 x 8 Inch Tyres - In Australia |
Hi - I am about to buy a set of 13 x 8 rims and would like to know what slick tyres I can get.. I want to run a max diameter of 20 - 21 inchs and maybe a 205 to 215.. What about AVON tyre? Thanks. The mini they are going on to is a track car only.. 1.3lt Super Charger With Carbon Fibre panels etc... Bye |
|
| Author: | mickmini [ Fri Dec 17, 2004 11:23 am ] |
| Post subject: | |
Where you at Devil? 
If you are in NSW call Gordon Levens at Emu Plains (in the phone book) for Avon and Yokahama options Or Gary's Motorsport Tyres at Blactown (in the phone book) for Dunlop. These guys can get the 10x6 in slicks that the Miglia racers use in the UK for about $220 each. [that was for others info Devil] Dunno who the Falken, Bridgestone etc distributors are. michael |
|
| Author: | hotbrick74 [ Sat Dec 25, 2004 5:21 pm ] |
| Post subject: | |
we have a set of 4 13x8" superlites at work :D carnt be sure what rubber they have on em. boss has 225/50/13" slicks on his 13x7 race wheels thou,i think you can go 195/45/13 but it will cost you a left nut and a arm :cry: |
|
| Author: | drmini in aust [ Sat Jan 01, 2005 4:38 pm ] |
| Post subject: | |
hotbrick74 wrote: we have a set of 4 13x8" superlites at work
 carnt be sure what rubber they have on em.boss has 225/50/13" slicks on his 13x7 race wheels thou,i think you can go 195/45/13 but it will cost you a left nut and a arm  That lets me out then...no left nut! (long story.. ):shock: |
|
| Author: | hotbrick74 [ Sat Jan 01, 2005 8:01 pm ] |
| Post subject: | |
did ay ladie get a tad ruff Doc? :lol: |
|
| Author: | brickworx [ Sat Jan 01, 2005 8:16 pm ] |
| Post subject: | |
Dunlop still do a few ranges of tyre to suit. Have to be careful of sidewall material though(pick the right one) I run 225/450/13 all round on my car on 7" wheels i found the offset on some 8" wheels to upset things also got a set of new hoosiers there but haven't tried them out yet Depending on the rolling diameter you want i may have some spares |
|
| Author: | paddy93 [ Sun Mar 20, 2005 9:23 pm ] |
| Post subject: | Hoosiers? Where!? |
Can I... Ummm... Borrow them next weekend? i'll let ya know how they go for the nationals... but when i give 'em back they might only be good for the baby pram. 
|
|
| Author: | drmini in aust [ Sun Mar 20, 2005 9:46 pm ] |
| Post subject: | |
hotbrick74 wrote: did ay ladie get a tad ruff Doc?
 Er... building demolition accident.. (OUCH!!)
|
|
| Author: | dr trim [ Sun Mar 20, 2005 10:04 pm ] |
| Post subject: | |
im disgusted but strangely inquisitive doc. 
|
|
| Author: | drmini in aust [ Mon Mar 21, 2005 5:57 am ] |
| Post subject: | |
Was on the roof, using an adze to knock the rafters out, I slipped & missed...
|
|
| Author: | TheMiniMan [ Wed Mar 23, 2005 9:11 pm ] |
| Post subject: | |
Dam Ouch!!! 
|
|
| Author: | gafmo [ Thu Mar 24, 2005 11:34 pm ] |
| Post subject: | |
drmini in aust wrote: hotbrick74 wrote: we have a set of 4 13x8" superlites at work carnt be sure what rubber they have on em.boss has 225/50/13" slicks on his 13x7 race wheels thou,i think you can go 195/45/13 but it will cost you a left nut and a arm That lets me out then...no left nut! (long story.. ):shock: At least you have your arms
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|