Ausmini
It is currently Sun Jun 16, 2024 4:34 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 7
  [ 91 posts ]  Go to page 1, 2, 3, 4, 5 ... 7  Next
  Print view Previous topic | Next topic 
Author Message
drmini in aust
PostPosted: Mon Dec 20, 2004 6:48 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39653
Location: near Baulkham Hills, NSW
Hey people,
I feel the need for speed, once again.. :P
Looking at a midweek (ie workday) outing to Wakefield Pk sometime in January.
Cost is $40 for a licence (12 months) and $80 for the day.
Oz, 13sec, Boosted, kazjim, Mini Mad, other usual MDC suspects- are U guys in? Any other takers??

Booking days are here..
http://www.wakefieldpark.com.au/index.c ... 3146edoras

I suggest a `cars only' day is the deal, as usual. 8)

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
ozmotorsport
 Post subject:
PostPosted: Mon Dec 20, 2004 6:52 pm 
Offline
998cc
998cc
User avatar

Joined: Tue Oct 05, 2004 5:05 pm
Posts: 1011
Location: South Coast
Yep, I'm in you just name the day. I went to work as sick as dog last week so I didnt waste my sickies now I have a reason to use one. :wink:
Top
 Profile  
 
13secmini
 Post subject:
PostPosted: Mon Dec 20, 2004 7:18 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sun Mar 21, 2004 10:28 am
Posts: 2452
Location: Wollongong
yep im in, name the day and ill ask the boss for a day off, woops i am the boss:)

my mini gets on the Dyno tomorrow and if everything goes well ill be at the street meet at wsid wednesday night to see what it can do in street trim.

Ill ask the tuner to set my high/low boost on 8 psi (street) and 14psi for wakefield and wsid, need the extra horses to catch you guys down the straight while you are get away from me in the corners :(

Maybe at eastern creek i could give you guys a run for your money :idea:

_________________
1974 Moke - 998cc
76 Clubman B16a2 Vtec AWD Turbo 12.9@105mph
https://www.youtube.com/watch?v=V9PW49e1hYs
Top
 Profile  
 
kazjim
 Post subject:
PostPosted: Mon Dec 20, 2004 7:34 pm 
Offline
1098cc
1098cc
User avatar

Joined: Tue Apr 06, 2004 2:49 pm
Posts: 1556
Location: Central Coast, NSW
Gotta sit this out.... Sorry guys....

No Centre pickup has scared me a little .....
Here's a reminder.....

Image

Next time.. I Promise......

J

PS - for thoses that didnt know, these bearings had less than 10,000 Miles on them and after taking a left-hander at some incredible speed (new cam/new handling) the bottom end ran dry and rattled.. it drove home (300Klm) but it was absolutley rooted when i got it home...... thank god for Nitrided Cranks !

_________________
Image
Top
 Profile  
 
9YaTaH
 Post subject: I like to watch :shock:
PostPosted: Mon Dec 20, 2004 7:44 pm 
Offline
1360cc
1360cc
User avatar

Joined: Sun Apr 11, 2004 11:32 am
Posts: 12390
Location: Sthrn HiLoLands, NSW, Australia
Depending on the day ...I could wander up and say hello....need an official? (me Grade 3)..... :wink:

_________________
"Show me the Mini!"
Top
 Profile  
 
Morris 1100
 Post subject:
PostPosted: Mon Dec 20, 2004 7:52 pm 
Offline
Causing or creating vexation

Joined: Wed Jul 21, 2004 10:32 pm
Posts: 19116
kazjim, take a look at http://www.accusump.com/
I worked on a racecar in the 80s that run one (Ford Mustang) and they work a treat.
It acts like an extra oil tank and when the supply from the pump drops the extra suppy cuts in. It only has enough oil to last for a short time but it is enough to get around a couple of corners.
Top
 Profile  
 
kazjim
 Post subject:
PostPosted: Mon Dec 20, 2004 7:54 pm 
Offline
1098cc
1098cc
User avatar

Joined: Tue Apr 06, 2004 2:49 pm
Posts: 1556
Location: Central Coast, NSW
OR i could just get my crap together and fit a centre oil pickup ......

BUT the engine has to come out again for that, and this is my daily driver......
Got to schedule down-time !!

its all gotta come out soon anyway, but I've got to get the alternate transport sorted and registered first......

J

_________________
Image
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Mon Dec 20, 2004 7:57 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39653
Location: near Baulkham Hills, NSW
Put an extra pint of oil in, file new FULL mark on dipstick... 8) :lol:

<edit> Rodchange is even worse for this than remote, as LH side of box is totally empty of bits, so more oil surge.
:idea: Put a silicone boob implant in there.. 8) :lol: :shock:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Last edited by drmini in aust on Mon Dec 20, 2004 8:02 pm, edited 1 time in total.

Top
 Profile  
 
drmini in aust
PostPosted: Mon Dec 20, 2004 7:58 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39653
Location: near Baulkham Hills, NSW
9YaTaH wrote:
Depending on the day ...I could wander up and say hello....need an official? (me Grade 3)..... :wink:


Sure, bring stopwatch! :lol:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Morris 1100
 Post subject:
PostPosted: Mon Dec 20, 2004 7:59 pm 
Offline
Causing or creating vexation

Joined: Wed Jul 21, 2004 10:32 pm
Posts: 19116
You don't need to pul the engine for the accusump :wink:
Top
 Profile  
 
9YaTaH
PostPosted: Mon Dec 20, 2004 8:02 pm 
Offline
1360cc
1360cc
User avatar

Joined: Sun Apr 11, 2004 11:32 am
Posts: 12390
Location: Sthrn HiLoLands, NSW, Australia
drmini in aust wrote:
9YaTaH wrote:
Depending on the day ...I could wander up and say hello....need an official? (me Grade 3)..... :wink:


Sure, bring stopwatch! :lol:


Hmmm, I just thought I would gowatch :oops: :?

_________________
"Show me the Mini!"
Top
 Profile  
 
Morris 1100
PostPosted: Mon Dec 20, 2004 8:17 pm 
Offline
Causing or creating vexation

Joined: Wed Jul 21, 2004 10:32 pm
Posts: 19116
9YaTaH wrote:
Hmmm, I just thought I would gowatch :oops: :?


You could always go along for the ride...

Image

You never know who you will meet...

Image
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Mon Dec 20, 2004 8:22 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39653
Location: near Baulkham Hills, NSW
That's my car! Good old 34 year old hydro bags and all.. :P

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
ozmotorsport
 Post subject:
PostPosted: Mon Dec 20, 2004 8:24 pm 
Offline
998cc
998cc
User avatar

Joined: Tue Oct 05, 2004 5:05 pm
Posts: 1011
Location: South Coast
Yeah I'll have the suicide seat and 5 point harness installed for any takers. BUT REMEMBER, the smilling team at Wakfield park still make you pay full freight just to be a passenger.
Top
 Profile  
 
Mini Mad
 Post subject:
PostPosted: Mon Dec 20, 2004 8:24 pm 
Offline
ET 13.457 seconds , OH YEAH !!!!
User avatar

Joined: Sun Sep 19, 2004 8:35 am
Posts: 7826
Location: Somewhere Around Sydney
Any of the following days are good for me:

5th, 9th, 14th, 16th, 24th...

_________________
Image
Starlet Conversion:
http://www.ausmini.com/forums/viewtopic.php?t=15484
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 7
  [ 91 posts ]  Go to page 1, 2, 3, 4, 5 ... 7  Next

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: Bing [Bot] and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.