Picked this up at the Brisbane Riverside Markets this morning - $15
Comes in the tube
And according to the range printed on the side there are three Mini models - Red., White and Blue
| ausmini https://www.ausmini.com/forums/ |
|
| New R/C Toy https://www.ausmini.com/forums/viewtopic.php?f=2&t=35997 |
Page 1 of 1 |
| Author: | Wombat [ Sun Sep 23, 2007 2:51 pm ] |
| Post subject: | New R/C Toy |
Picked this up at the Brisbane Riverside Markets this morning - $15
Comes in the tube
And according to the range printed on the side there are three Mini models - Red., White and Blue
|
|
| Author: | Kennomini [ Sun Sep 23, 2007 3:10 pm ] |
| Post subject: | |
My mum picked one of those up for $1 at a garage sale. I don't have the controler though, so what frequency is yours? Dose it slow down when you turn? I got a subby in a tube like that and when you turn it takes some power from the drive motor 
|
|
| Author: | Wombat [ Sun Sep 23, 2007 4:16 pm ] |
| Post subject: | |
mine is 35MHz but they come in 27,35,40,49,and 56Mhz - No slow down or speed control of any sort it's go or no go - almost does a "hand brake turn' on the slippery wooden floor 
|
|
| Author: | Kennomini [ Sun Sep 23, 2007 4:23 pm ] |
| Post subject: | |
Thanks for that I'll drop in to the local gadget shop and see if I can get a controller 
|
|
| Author: | Dylans Clubby [ Sun Sep 23, 2007 6:40 pm ] |
| Post subject: | |
ive got one of these, its a pug though. kenno, ive got the controller but i dont know what frequency it is. one of the steering components is busted, as is the body i think. i can post it to you for the cost of postage if you want. i'll dig it out later and have a look. |
|
| Author: | -=MiniMafia=- [ Sun Sep 23, 2007 6:43 pm ] |
| Post subject: | |
I have these, they are the older ones. 
I have three in total, you use to be able to buy faster motors and gears for them, not sure if you still can. |
|
| Author: | Dylans Clubby [ Sun Sep 23, 2007 6:46 pm ] |
| Post subject: | |
that controller looks like the one i have |
|
| Author: | Kennomini [ Sun Sep 23, 2007 7:24 pm ] |
| Post subject: | |
Dylan's Clubby wrote: ive got one of these, its a pug though. kenno, ive got the controller but i dont know what frequency it is.
one of the steering components is busted, as is the body i think. i can post it to you for the cost of postage if you want. i'll dig it out later and have a look. I opened mine up and I'm pretty sure it's 35 MHz so if you've got that frequency I may be interested, (debending on postage costs) any idea what that would cost? I'm north of Brisbane. |
|
| Author: | Dylans Clubby [ Sun Sep 23, 2007 7:33 pm ] |
| Post subject: | |
i thnk the frequency is 27B... thats what sticker is on the bottom of the controller, also on the side of the tin it says frequency: 27A, 27B, 27C, 27D and then some chinese writing. i can still post if you want. i recenly posted a number plate flap to syd which cost $10. they go by weight, and this thing is a bit lighter... UPDATE: i ahve in fact torn this thing to puieces and i think i chucked the antenna out yonks ago... |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|