Me too, but if so there should be an H after the Ta/
| ausmini https://www.ausmini.com/forums/ |
|
| engine numbers https://www.ausmini.com/forums/viewtopic.php?f=2&t=36143 |
Page 1 of 1 |
| Author: | leema [ Thu Sep 27, 2007 5:11 pm ] |
| Post subject: | engine numbers |
Hi all, ive been searchn round but cant really find anything I'm looking at an engine with the number 12Y0/TA/17*** I know it's a 1275 but any ideas wat its out of? Cheers Matt |
|
| Author: | Morris 1100 [ Thu Sep 27, 2007 6:09 pm ] |
| Post subject: | |
Could it be 12YD/Ta/17***? It would be a Morris 1100S engine. |
|
| Author: | DTrain [ Thu Sep 27, 2007 7:59 pm ] |
| Post subject: | |
i concur |
|
| Author: | drmini in aust [ Thu Sep 27, 2007 8:03 pm ] |
| Post subject: | |
Me too, but if so there should be an H after the Ta/
|
|
| Author: | leema [ Thu Sep 27, 2007 9:47 pm ] |
| Post subject: | |
no there is no H there what so ever. theres not even enough room for a H to be there. |
|
| Author: | drmini in aust [ Thu Sep 27, 2007 10:15 pm ] |
| Post subject: | |
If it's /TA not /Ta, it has definitely been restamped.
|
|
| Author: | leema [ Thu Sep 27, 2007 10:20 pm ] |
| Post subject: | |
its TA with out a doubt, restamping...donno if thats a bad thing or not hmmm. cheerz |
|
| Author: | drmini in aust [ Thu Sep 27, 2007 10:23 pm ] |
| Post subject: | |
/Ta designation was used on Morris 1100 and Morris 1100S, /TA was never used on those, or Minis either. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|