ausmini
https://www.ausmini.com/forums/

dash template.wanted
https://www.ausmini.com/forums/viewtopic.php?f=2&t=36274		 Page 1 of 2
Author:  mr_a_series [ Mon Oct 01, 2007 1:56 pm ]
Post subject:  dash template.wanted
g'day guys and gals"if any" i recieved a template for a boot board and I'm chasing a template for a dash I have a two guage instrument binnacle and know extra guages. But if anyone could supply a three guage template as well it would be much appreciated. pls pm me for an address Thankx
Author:  mad-mk1 [ Mon Oct 01, 2007 2:12 pm ]
Post subject: 
have you got any pics of the sorta thing your after
Author:  d1ck0 [ Mon Oct 01, 2007 2:21 pm ]
Post subject: 
I can help once I get my external drive back from my Son, should be later today. Also look at gettig yourself the Ultimate Mini CD from "Wombat." It's got lotsa this stuff on there too.

Cheers

Dicko.
Author:  meehal [ Mon Oct 01, 2007 2:25 pm ]
Post subject: 
I too am after a dash board.....

Something minimal with the gauges in the middle.

Thank you.
Author:  Wombat [ Mon Oct 01, 2007 2:27 pm ]
Post subject: 
Sorry - only have centre consol and boot board plans on the CD - Hmmmm think I have dash plans somewhere ...................
Author:  mr_a_series [ Mon Oct 01, 2007 2:40 pm ]
Post subject: 
OOO OOO OOO OOO centre console to pls lol
Author:  Wombat [ Mon Oct 01, 2007 2:46 pm ]
Post subject: 
mr_a_series wrote:
OOO OOO OOO OOO centre console to pls lol


You have mail
Author:  d1ck0 [ Mon Oct 01, 2007 2:55 pm ]
Post subject: 
Sorry Wombat I thought the Dash plans were on the CD too. I knew there were some plans on there.

If anyone gets stuck I do have dash plans, and they have a variety of options, ie: 2 dial, 3 dial, large centre speedo etc. I am about to tackle this project in the next 2 weeks on ID10CY so i'll post pics once its done.

I'm also talking to a friend that does CNC machining etc. We may see what we can machine out of some nice timber.....Stay tuned. If that comes about you all will be the first to know.
Author:  steve1965 [ Mon Oct 01, 2007 3:31 pm ]
Post subject:  Dash
Have a look around on this site, you will find what you need.

http://www.minifinity.com/modules.php?o ... d=interior

I used this dash plan and here is a pic of the final product.

Image

Steve
Author:  d1ck0 [ Mon Oct 01, 2007 3:38 pm ]
Post subject:  Re: Dash
steve1965 wrote:

I used this dash plan and here is a pic of the final product.

Steve
What did you make yours out of?

Dicko
Author:  steve1965 [ Mon Oct 01, 2007 3:44 pm ]
Post subject: 
I used 12mm MDF.

Steve
Author:  EST-071 [ Mon Oct 01, 2007 3:51 pm ]
Post subject: 
Steve,
Where did you get the chrome rings for around the gauge cut outs?
Cheers Pete
Author:  steve1965 [ Mon Oct 01, 2007 4:13 pm ]
Post subject: 
deluxe_68 wrote:
Steve,
Where did you get the chrome rings for around the gauge cut outs?
Cheers Pete


I bought them from a dash place in the uk, they were made from stainless steel. I think i paid around $100 including postage.

Steve
Author:  d1ck0 [ Tue Oct 02, 2007 6:28 pm ]
Post subject: 
I've got the multiple dash plans now, as well as Boot Liner and Centre Arm Rest. Get them printed at 100% and they are the correct size. Cost me $4.00 to have the dash printed out.

PM me with your email if you'd like a copy.

Cheers.

Dicko.
Author:  sociallydisabled [ Tue Oct 02, 2007 11:41 pm ]
Post subject:  Re: Dash
steve1965 wrote:
Have a look around on this site, you will find what you need.

http://www.minifinity.com/modules.php?o ... d=interior

I used this dash plan and here is a pic of the final product.

Image

Steve


i have used the same plans and got the dash, but do you have more detail on how you have mounted your speedo and such? ive been looking at it for a while and i cant seem to come up with a decent idea, what size holes did you cut? Cheers Mate. and is that just painted in your car's paint? looks tops mate.
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/