ausmini
https://www.ausmini.com/forums/

Mk1 Cooper S grill screw spacers
https://www.ausmini.com/forums/viewtopic.php?f=2&t=36469		 Page 1 of 1
Author:  66S [ Mon Oct 08, 2007 10:09 am ]
Post subject:  Mk1 Cooper S grill screw spacers
Hi Guys,
Does anybody know what Cooper S grill screw spacers look like? They are required to move the grill forward to clear the oil cooler.

Thanks
Al
Author:  AEG163job [ Mon Oct 08, 2007 10:58 am ]
Post subject: 
They are black plastic, circular about 5 mm thick i think, about 8-10 mm in diameter.
I've never been able to find 'em in any parts book :twisted:
Something you can probably make up your self.
Author:  66S [ Mon Oct 08, 2007 11:10 am ]
Post subject: 
Hi Pete,
I've seen them listed but I'm not sure where. Possibly in the oil cooler section??

Thanks for your help, I'll makie some but would like the exact dimensions if I can.

Best regards
Al
Author:  AEG163job [ Mon Oct 08, 2007 2:47 pm ]
Post subject: 
Al, I think you are right. I now notice there is a tiny un-numbered object in the bottom LH corner of the Mini Spares Centre dogalogue, page 46 (oil filters, pumps, coolers). Nothing in the parts list though.

If I was clever enough, I could post the scanned page. :?
Author:  Morris 1100 [ Mon Oct 08, 2007 5:58 pm ]
Post subject: 
Part number 24A1152 according to my 1968 parts book.
Author:  Mick [ Mon Oct 08, 2007 6:05 pm ]
Post subject: 
Damn...that was mean to be there?

drat....oops.
Author:  winabbey [ Fri Oct 12, 2007 7:15 pm ]
Post subject: 
According to my parts book (PUB 1056M) it's 24A1152 as already quoted, and you need six of them. Interestingly this part is also used as a spacer behind the base of the press-studs that are pop-rivetted to the floor to locate the carpet.
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/