ausmini
https://www.ausmini.com/forums/

Where to get coloured wires
https://www.ausmini.com/forums/viewtopic.php?f=2&t=36721		 Page 1 of 2
Author:  d1ck0 [ Sun Oct 14, 2007 4:40 pm ]
Post subject:  Where to get coloured wires
We are baout to do some repairs to the Clubby wiring.

Does anybody know where we can buy the relative combination of colours and traces to match the original loom? Preferably by the metre rather than buying rolls of each.

Cheers.

Dicko.
Author:  henry the mini [ Sun Oct 14, 2007 5:26 pm ]
Post subject: 
Try Classic wiring loom in Melbourne somewhere (they have a web site) They sell loom for mini so they probably have the right colour wire. Maby they can sell you some, worth a try.
Author:  sgc [ Sun Oct 14, 2007 5:32 pm ]
Post subject: 
Found this just now:

http://www.vinwire.com.au/

that web site wrote:
As well as supplying complete harnesses or looms for a wide range of cars, trucks, motor bikes, tractors, we can also provide many component items to enable you the restorer to make your own customized loom or modify it to your needs.
Author:  d1ck0 [ Sun Oct 14, 2007 6:09 pm ]
Post subject: 
Thanks guys I'll follow them up.

Cheers.

Dicko
Author:  Moke'n'Andy [ Sun Oct 14, 2007 6:45 pm ]
Post subject: 
Nava also have a good range of colour/colour trace - may not be the exact but any Repco can get it in for you. get minimum 3mm (10 AMP) or 4mm (15 Amp) depending on your application (or thicker?)

http://www.narva.com.au/Terminals_21.html
Author:  peter dunn [ Sun Oct 14, 2007 8:04 pm ]
Post subject: 
Dicko just grab another old loom and cut it up, someone in your area may evem have one they would donate // swap etc mini regards peter.
Author:  sgc [ Sun Oct 14, 2007 8:10 pm ]
Post subject: 
Trouble with that these days is all the looms are now 30+ years old, and all suffer the same problems. It's ok for minor bits'n'pieces, but any major work really deserves new wiring.
Author:  d1ck0 [ Sun Oct 14, 2007 8:37 pm ]
Post subject: 
Found a great company in UK http://www.autosparks.co.uk/index.php?content_page=home that are really well priced.

For 5m each of the 5 colour combinations i need and a new 6 way male and female connector, delivered to australia, for $27.00. Not too bad :)

Dicko
Author:  henry the mini [ Sun Oct 14, 2007 9:03 pm ]
Post subject: 
d1ck0 wrote:
Found a great company in UK http://www.autosparks.co.uk/index.php?content_page=home that are really well priced.

For 5m each of the 5 colour combinations i need and a new 6 way male and female connector, delivered to australia, for $27.00. Not too bad :)

Dicko


I am shure you can do better locally, have a look.
Author:  d1ck0 [ Sun Oct 14, 2007 9:26 pm ]
Post subject: 
I'll visit my local "pommy" Auto Electrician tomorrow and see what he can come up with for me.
Author:  Mick [ Sun Oct 14, 2007 9:28 pm ]
Post subject: 
Not too bad all the same....

Have to vouch for Classic Looms down here in Melbourne though, they do some nice work and have all the colours it seems.
Author:  d1ck0 [ Sun Oct 14, 2007 9:31 pm ]
Post subject: 
I'll give them a call too.

:D

Dicko
Author:  brickworx [ Sun Oct 14, 2007 9:33 pm ]
Post subject: 
we have a box of old cut up looms,
if you need a specific wire
Author:  d1ck0 [ Sun Oct 14, 2007 9:42 pm ]
Post subject: 
brickworx wrote:
we have a box of old cut up looms,
if you need a specific wire
So if i told you what colours i needed could you send me some? I really only need a couple of m's of each :D

Cheers.

Dicko
Author:  brickworx [ Sun Oct 14, 2007 9:43 pm ]
Post subject: 
we can only try.
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/