ausmini
https://www.ausmini.com/forums/

SU Needles for 1380
https://www.ausmini.com/forums/viewtopic.php?f=2&t=36772		 Page 1 of 1
Author:  AJ [ Mon Oct 15, 2007 8:01 pm ]
Post subject:  SU Needles for 1380
Any ideas on needles for the following ?? .....motor is Mk1 Cooper S out to 1380 , has twin inch and a quarter SU's , fairly standard head and Wade 446b cam
Author:  simon k [ Mon Oct 15, 2007 11:36 pm ]
Post subject: 
that'll be a tough one... not many people with a 1380 would be running twin 1 1/4"s, so you won't find a lot of precidents... Mr Vizard only has recommendations for 1275's in the big yellow bible. The hottest he recommends is an AF

I once pulled all of the needle figures out of the DOS based needle selection program and put them in an access database. Having a look at it, and looking for needles richer than the AF, there were 78 of them :roll:
Author:  smac [ Tue Oct 16, 2007 4:55 am ]
Post subject:  needle choices
Along the lines of what skssgn has said, there's a pretty cool spreadsheet out there set up to do comparisons etc (as opposed to recommendations like winsu). Search for "susearch"....should be out there some place. If not let me know and I'll dig it out.
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/