| ausmini https://www.ausmini.com/forums/ |
|
| Indicators https://www.ausmini.com/forums/viewtopic.php?f=2&t=37079 |
Page 1 of 1 |
| Author: | Drekkus [ Thu Oct 25, 2007 7:18 am ] |
| Post subject: | Indicators |
Has anyone managed to get the auto cancel function to work on a Rover steering column with an after market steering wheel. I can see which part it is on the column but can't work out how to get it to function. I'd image I might need to make a mod to the steering wheel but rather know what before experimenting. |
|
| Author: | VicMini13 [ Thu Oct 25, 2007 8:30 am ] |
| Post subject: | |
If you look on the back of the original wheel there are two lugs in the centre that engage slots in a rotating nylon ring at the top of the column assembly. I riveted a small piece of metal (about 3cm by 1cm) onto the back of the boss that fitted into one of those slots - it's well hidden behind the wheel and once I gave it a squirt of black pint to match the boss you don't notice it at all. |
|
| Author: | dove grey 64 [ Thu Oct 25, 2007 7:45 pm ] |
| Post subject: | |
some moto lita boss kits come with the lugs intact |
|
| Author: | Drekkus [ Thu Oct 25, 2007 9:58 pm ] |
| Post subject: | |
I've just rivetted a small lug onto the bottom of the boss and it seems to work ok in the garage.I guess I'll find out tomorrow if it works in the real world. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|