| ausmini https://www.ausmini.com/forums/ |
|
| Piston Rings https://www.ausmini.com/forums/viewtopic.php?f=2&t=37099 |
Page 1 of 1 |
| Author: | craig goss [ Thu Oct 25, 2007 7:54 pm ] |
| Post subject: | Piston Rings |
Hey guys, I was talking to some guy about total seal piston rings. I was just wondering are these any good? whats the cost? and who makes them? for a 1330. I was also wondering who makes quality pistons that could be used for turbo application, so with a low compression of 11 to 18cc?? for a 1330, so +0.60 Cheers |
|
| Author: | Spaceboy [ Thu Oct 25, 2007 8:14 pm ] |
| Post subject: | |
what are total seal piston rings? are you talking low comp pistons for your car so you can run boost? i was told you can machine out hypatecs to get the extra cc's. |
|
| Author: | drmini in aust [ Thu Oct 25, 2007 8:18 pm ] |
| Post subject: | |
http://www.totalseal.com/ |
|
| Author: | craig goss [ Thu Oct 25, 2007 10:06 pm ] |
| Post subject: | |
Yea , low comp piston so that i can run boost |
|
| Author: | Archangel007 [ Fri Oct 26, 2007 7:28 am ] |
| Post subject: | |
Quote: so with a low compression of 11 to 18cc??
That's a big margin - find the ideal C/R and work backwards from there. I would presume that C/R of 8.5 to 9.0 to one would be ideal for your application. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|