d1ck0, the wipers have never self parked since I have had the LS even with the original switch.
I pulled the wiper motor off and apart and there was a fair amount of rust on the old wiper plate. Cleaned everything up but still a no auto stop..
| ausmini https://www.ausmini.com/forums/ |
|
| Self parking wipers... https://www.ausmini.com/forums/viewtopic.php?f=2&t=37301 |
Page 1 of 1 |
| Author: | Smokie [ Thu Nov 01, 2007 12:49 pm ] |
| Post subject: | Self parking wipers... |
I need some wise advice about self parking wipers. I just fitted a new wiper park plate but guess what, the wipers still won't self park.. Can anyone suggest why it is so??? |
|
| Author: | d1ck0 [ Thu Nov 01, 2007 3:15 pm ] |
| Post subject: | |
Did they self park when you had your switches relocated? The wiring on the Clubby wipers is a tricky one. The original switch had 5 contacts, or which 4 are used, No 3 is the one that isn't used. The switch switches to Earth, so the motor must have power. The wires to the switch are as follows: Pin 1 - Black/Green (Speed 1) Pin 2 - Black (Earth) Pin 4 - Red/Light Green (Speed 2) Pin 5 - Blue/Light Green (Parking) When Off, Pin 4 & 5 are bridged. Speed 1, Pin 1 & 2 are bridged. Speed 2, Pin 2 & 4 are bridged. I'm attempting to recreate this with a 2 location toggle switch (similar to yours) and a Relay that has Double switching in it. I'll let you know if I succeed. Dicko. |
|
| Author: | Smokie [ Thu Nov 01, 2007 3:47 pm ] |
| Post subject: | |
d1ck0, the wipers have never self parked since I have had the LS even with the original switch. I pulled the wiper motor off and apart and there was a fair amount of rust on the old wiper plate. Cleaned everything up but still a no auto stop..
|
|
| Author: | Rodney [ Thu Nov 01, 2007 4:05 pm ] |
| Post subject: | |
Hi Smokie, There's an article about self parking or the auto stop in the mini encycleopedia somewhere if it's any use. I'll find it and post the link to it. Try this mate http://www.ime.org.uk/ime/w/wiper_info.html Hooroo |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|