So, New and solid type.
I think $300 would be a fairly high price for those! Given the current exchange rate you can buy the best MED full roller rockers for around $500 (plus freight of course
).
Not excessive, just top dollar!
My 2c
M
| ausmini https://www.ausmini.com/forums/ |
|
| 1.5 rockers on ebay https://www.ausmini.com/forums/viewtopic.php?f=2&t=37423 |
Page 1 of 1 |
| Author: | sociallydisabled [ Mon Nov 05, 2007 5:10 pm ] |
| Post subject: | 1.5 rockers on ebay |
what are 1.5 rockers worth? is 300 asking a bit much? |
|
| Author: | Matt68 [ Mon Nov 05, 2007 5:17 pm ] |
| Post subject: | |
Roller tipped, Full Roller, Solid? Second Hand, New? M |
|
| Author: | sociallydisabled [ Mon Nov 05, 2007 5:19 pm ] |
| Post subject: | |
good questions lol sorry http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&Item=320176091683&Category=32072&_trksid=p3907.m29 |
|
| Author: | Matt68 [ Mon Nov 05, 2007 5:27 pm ] |
| Post subject: | |
So, New and solid type. I think $300 would be a fairly high price for those! Given the current exchange rate you can buy the best MED full roller rockers for around $500 (plus freight of course ).
Not excessive, just top dollar! My 2c M |
|
| Author: | Mick [ Mon Nov 05, 2007 5:31 pm ] |
| Post subject: | |
Pressed steel 1.5's? i know it can be done, just didn't think you might actually get that much based money on old perceptions.. |
|
| Author: | sgc [ Mon Nov 05, 2007 5:39 pm ] |
| Post subject: | |
I paid $250 a few months ago for a set of as-new s/h Mini Spares forged 1.5 rockers. $300 for modified pressed steel items is a bit rich... Is 1.5:1 even achievable with those? I thought the Doc had got 1.3:1 out of them... ? I'm sure he'll chime in 
|
|
| Author: | sociallydisabled [ Mon Nov 05, 2007 6:03 pm ] |
| Post subject: | |
i wasnt too keen on gettin em just thought they might be at a good price, ill prob do the corolla ones |
|
| Author: | drmini in aust [ Mon Nov 05, 2007 6:12 pm ] |
| Post subject: | |
sgc wrote: I paid $250 a few months ago for a set of as-new s/h Mini Spares forged 1.5 rockers. $300 for modified pressed steel items is a bit rich...
Is 1.5:1 even achievable with those? I thought the Doc had got 1.3:1 out of them... ? I'm sure he'll chime in You won't ever get 1.5 out of pressed steel rockers with offset bushes, despite what that UK eBay seller calls his. I made my own bushes with more offset (1.1mm) than the UK ones (0.8mm), and I got 1.31:1. Perfect for my 1132 Moke... 
If you want Minispares forged ones, they are 1.58:1. I have a set in my 1360, they cost me £90 + import duty and GST, years ago. Current best local price I have is $466.25, from Karcraft. If they have stock. These are a good rocker, many people race with them. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|