Right, so bought the DP2102's (that SPECIFY Rover Mini on the box - see pic.) and they're wrong.
Can ANYONE tell me what pad i need by looking at the shape of the old one?
| ausmini https://www.ausmini.com/forums/ |
|
| Brake pads? (with pics) https://www.ausmini.com/forums/viewtopic.php?f=2&t=37513 |
Page 1 of 1 |
| Author: | boho [ Thu Nov 08, 2007 8:55 am ] |
| Post subject: | Brake pads? (with pics) |
What number EBC Greenstuff pad do i need for the Rover? |
|
| Author: | boho [ Thu Nov 08, 2007 9:17 am ] |
| Post subject: | |
Found a part number here. Are my discs 7.5"? |
|
| Author: | sports850 [ Thu Nov 08, 2007 9:24 am ] |
| Post subject: | |
Yours should be 8.4's I think Een , you've got 12" wheels haven't you ? The brochure doesn't say which discs but I'm sure by then they were all 8.4's . |
|
| Author: | boho [ Thu Nov 08, 2007 9:30 am ] |
| Post subject: | |
After some searching, i agree. They're 12" wheels and i think cos of that they're 8.4's. I think the Greenstuffs part # is DP2102. |
|
| Author: | boho [ Thu Nov 08, 2007 4:47 pm ] |
| Post subject: | |
Right, so bought the DP2102's (that SPECIFY Rover Mini on the box - see pic.) and they're wrong.
Can ANYONE tell me what pad i need by looking at the shape of the old one?
|
|
| Author: | smac [ Thu Nov 08, 2007 5:15 pm ] |
| Post subject: | |
I have one in front of me that looks identical, and fits 8.4" mini callipers. Part number is DP2127 - says it fits Vauxhall Viva, TR7, Rover MG Midget / Mini But I don't know what calipers you have sorry? Edit - sorry just to clarify, the one in front of me (EBC) looks identical to your used one. |
|
| Author: | afh001 [ Thu Nov 08, 2007 5:21 pm ] |
| Post subject: | |
Yep, DP2127 is the EBC pad for 8.4" setups |
|
| Author: | boho [ Thu Nov 08, 2007 5:25 pm ] |
| Post subject: | |
Thanx, guys. 
Although the picture is wrong (it's the same picture for EVERY part on this page  ), the application info. here is correct - 1990 onwards Rover 1.3.
I'll try and swap the 2102's for 2127's. |
|
| Author: | speedy [ Thu Nov 08, 2007 6:44 pm ] |
| Post subject: | |
So you saying that that there are two types of 8.4" pads, pre and post 1990? PM me if you can't exchange them. 
|
|
| Author: | KLAS [ Thu Nov 08, 2007 6:52 pm ] |
| Post subject: | |
speedy wrote: So you saying that that there are two types of 8.4" pads
no, they are all the same, maybe there was a change in factory part number, but no change was made to the part itself. the pad with the holes is for the 7.5 disc |
|
| Author: | sgc [ Thu Nov 08, 2007 7:04 pm ] |
| Post subject: | |
KLAS wrote: the pad with the holes is for the 7.5 disc
Concur -- those are the ones I have on my 7.5" discs with 4-pot calipers. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|