| ausmini https://www.ausmini.com/forums/ |
|
| Carby Question... https://www.ausmini.com/forums/viewtopic.php?f=2&t=37620 |
Page 1 of 1 |
| Author: | henry the mini [ Sun Nov 11, 2007 8:02 am ] |
| Post subject: | Carby Question... |
Hi All. I am upgrading my carby from a 1.25 to a 1.5 and i have a few question. 1- Is it normal that on the 1.5 the throtle and choke cable are on the opposite side then on the 1.25? 2- On my 1.25 there is a kind of plate that goes between the carby and the manifold where the throttle cable goes throught, do i need one of those for a 1.5, i assume i do. Where can i get one of those for a 1.5 Thanks very much. EDIT: Also as there is 2 parts between the carby and the manifold, do i need 3 gasket. And do i need to put gasket sealant like on the engine??? |
|
| Author: | sports850 [ Sun Nov 11, 2007 8:10 am ] |
| Post subject: | |
Basically yes and yes . Check with your local mini wrecker/recycler place as most should have some kicking around , failing that put a wanted ad up and see who's got one sitting around . You will also need a spacer between the original 1 1/2" manifold and the carb if you haven't already got one . |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|