| ausmini https://www.ausmini.com/forums/ |
|
| Sandblasting https://www.ausmini.com/forums/viewtopic.php?f=2&t=3797 |
Page 1 of 2 |
| Author: | MiniK [ Tue Jan 04, 2005 8:05 pm ] |
| Post subject: | Sandblasting |
I have the opportunity to grab a sandblasting cabinet. Its not massive but good enough to do some bits and pieces. In terms of wheels im not entirely sure yet....will find out later. I just wanted to know if people are at all interested in having some small sandblasting work done, and at not too dear prices 
If so I might grab 'er! 
|
|
| Author: | gafmo [ Tue Jan 04, 2005 9:11 pm ] |
| Post subject: | |
Could you fit a Clutch housing and a Gearbox Shell in it |
|
| Author: | MiniK [ Tue Jan 04, 2005 9:46 pm ] |
| Post subject: | |
Ill check the dimensions gafs...and then let you know
|
|
| Author: | mickmini [ Tue Jan 04, 2005 9:46 pm ] |
| Post subject: | |
if i had a garage, i would take it in a shot. very handy bit of gear to have around. |
|
| Author: | MiniK [ Tue Jan 04, 2005 9:52 pm ] |
| Post subject: | |
well ive got a garage.....so thats no problem. 
|
|
| Author: | mickmini [ Tue Jan 04, 2005 9:54 pm ] |
| Post subject: | |
lucky bastard
|
|
| Author: | gafmo [ Tue Jan 04, 2005 9:58 pm ] |
| Post subject: | |
I'v got a Double... and Marcia has her nose up still with Morris sitting out of the rain nice and comfy
Sorry guys 
|
|
| Author: | mickmini [ Tue Jan 04, 2005 10:02 pm ] |
| Post subject: | |
waddya mean guys, i'm the only one in this discussion without the garaage 
|
|
| Author: | gafmo [ Tue Jan 04, 2005 10:03 pm ] |
| Post subject: | |
Wait thier will be more |
|
| Author: | mickmini [ Tue Jan 04, 2005 10:04 pm ] |
| Post subject: | |
now you're gloating |
|
| Author: | gafmo [ Tue Jan 04, 2005 10:09 pm ] |
| Post subject: | |
Yer maybe...I use to have a Garage that I could not use in the old house,,,it had a driveway 45degree angle and 2 meters long. No clearance for a car at all. So ever job I had to do was on the grass  When you drop something you will never find it till your puching the mower...another hole in the fibro  Opps sorry Dear
|
|
| Author: | 1310/71 [ Tue Jan 04, 2005 10:17 pm ] |
| Post subject: | |
Gafmo, I've got a sandblast cabinet from Hare & Forbes ( a top-loading one on a stand, rather than the larger side-load type). I reckon I could fit a clutch cover in mine. A gearbox casing would probably just fit but would probably be too heavy and too awkward to do. KB |
|
| Author: | Besser [ Wed Jan 05, 2005 8:32 am ] |
| Post subject: | Make your own sand blasting cabnet |
I made my own cabnet. Used an old oil tank for house heaters. They come with legs and all. Used a drill and jigsaw to make the necessary holes and stuff, bought a cheap sandblasting kit and I'm away like Flyn. In hind sight I should mave made the door a full side panel then I could have fitted the bonnet in!! PS: you need a fn big compressor to make it effective, I ended running a 16cfm straight from the tank with an inline moisture trap, now it works well!! |
|
| Author: | MiniK [ Wed Jan 05, 2005 5:34 pm ] |
| Post subject: | |
gafmo wrote: I'v got a Double...
and Marcia has her nose up still with Morris sitting out of the rain nice and comfySorry guys ....Three Garages(one double), and two industrial sheds where i live.... 
|
|
| Author: | Marvin [ Wed Jan 05, 2005 6:38 pm ] |
| Post subject: | |
mickmini wrote: waddya mean guys, i'm the only one in this discussion without the garage
just adding to the discussion so that mickmini doesn't get lonely. I can only dream of a garage at the mo 
|
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|