ausmini https://www.ausmini.com/forums/ |
|
Steering Wheel https://www.ausmini.com/forums/viewtopic.php?f=2&t=38091 |
Page 1 of 1 |
Author: | odd [ Fri Nov 23, 2007 7:51 am ] |
Post subject: | Steering Wheel |
Can anybody give me an idea of whether these steering wheels will fit my 68 Deluxe? http://cgi.ebay.com.au/INNOCENTI-MINI-C ... dZViewItem http://cgi.ebay.com.au/MINI-ORIGINAL-ST ... dZViewItem Cheers Odd |
Author: | Harley [ Fri Nov 23, 2007 8:11 am ] |
Post subject: | |
They should. The spline on the steering column was the same from '59 to '97. ![]() |
Author: | meehal [ Fri Nov 23, 2007 8:19 am ] |
Post subject: | |
they should i thought about doing the same thing but the postage is going to cost heaps.... |
Author: | Mike_Byron [ Fri Nov 23, 2007 8:26 am ] |
Post subject: | |
They will fit OK. If you want a good steering wheel - get one off a rover mini. They are a smaller diameter and have a thicker padded rim. Very nice to drive with and nice looking. I have one on my mini and one for a van resto I am doing. I am sure Brickworkz would have them stacked to the roof. Mike. |
Author: | meehal [ Fri Nov 23, 2007 9:01 am ] |
Post subject: | |
pics of the rover wheel? im interested. i've been after the bus style orig wheel for my 850 for months now with no success...... |
Author: | Fat Boy Dave [ Fri Nov 23, 2007 9:40 am ] |
Post subject: | |
Note there are 2 sizes of spline as I recently found out when purchasing a new steering wheel boss. I don't know any way to tell which unless you take the wheel off. Some other smarty pants on here might know. |
Author: | Harley [ Fri Nov 23, 2007 10:42 am ] |
Post subject: | |
Small one is for the airbag column off a post '97 mini. ![]() |
Author: | Fat Boy Dave [ Fri Nov 23, 2007 11:28 am ] |
Post subject: | |
OBA list 2 boss types, one for deluxe and one for Cooper S Pretty sure these are both pre 1997. ![]() |
Author: | Matt68 [ Fri Nov 23, 2007 3:51 pm ] |
Post subject: | |
Fat Boy Dave wrote: OBA list 2 boss types, one for deluxe and one for Cooper S Pretty sure these are both pre 1997.
![]() Should be one for centre horn push and one for column horn push. Cheers Matt |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |