| ausmini https://www.ausmini.com/forums/ |
|
| Just need clarification refitting dizzy https://www.ausmini.com/forums/viewtopic.php?f=2&t=38103 |
Page 1 of 1 |
| Author: | DTrain [ Fri Nov 23, 2007 2:51 pm ] |
| Post subject: | Just need clarification refitting dizzy |
Heyas, The dizzy has been removed from my 1275 and the engine has been turned over in the meantime. When im refitting it would it just be a case of getting the engine to TDC and inserting the dizzy with the vac advance on the top and the rotor pointed at 2 o'clock (spark plug of cylinder 1)?? Or is there something else needed since the engine has been turned over with the dizzy out? Cheers for the help, Dave |
|
| Author: | Anto [ Fri Nov 23, 2007 3:14 pm ] |
| Post subject: | |
Make sure number 1 & 4 are at TDC and the rockers on number 4 are rocking. Then the rotor should point to cylinder 1. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|