Came in handy for me
Needed to know whether the Swift and Mini would fit side by side in the garage.
| ausmini https://www.ausmini.com/forums/ |
|
| mini dimensions https://www.ausmini.com/forums/viewtopic.php?f=2&t=38193 |
Page 1 of 1 |
| Author: | mattsmadmini [ Mon Nov 26, 2007 11:28 am ] |
| Post subject: | mini dimensions |
hey guys i was wondering if anyone could give me a website or tell me the dimensions of a 73 leyland mini? cheers |
|
| Author: | Harley [ Mon Nov 26, 2007 11:56 am ] |
| Post subject: | |
To get you started: 4ft wide, 4ft high and 10 ft long, plus 2 inches for clubby front. Also need to add width of mirrors or flares. |
|
| Author: | Minimic [ Mon Nov 26, 2007 11:57 am ] |
| Post subject: | |
http://www.minimania.com/MM/Mini_Body_Dimensions.htm |
|
| Author: | Archangel007 [ Mon Nov 26, 2007 12:12 pm ] |
| Post subject: | |
Sticky that site! |
|
| Author: | sgc [ Mon Nov 26, 2007 1:59 pm ] |
| Post subject: | |
Harley wrote: To get you started:
4ft wide That's the track, not the vehicle width. My numbers here say 4' 7" wide at the body extremes of a Morris, possibly different (but not by much) for a Clubby. |
|
| Author: | Morris 1100 [ Mon Nov 26, 2007 7:58 pm ] |
| Post subject: | |
From the Mini Deluxe/Cooper S handbook. Quote: Overall Length 10ft. 0¼in. Overall Width 4ft. 7½in. Overall Height 4ft 5in. From the Mini Clubman/Clubman GT handbook. Quote: Overall Length 10ft. 5¼in. (3.13m)
Overall Width 4ft. 7½in. (1.41m) Overall Height 4ft 5in (1.35m) Can we make this a sticky? |
|
| Author: | sgc [ Mon Nov 26, 2007 9:52 pm ] |
| Post subject: | |
Morris 1100 wrote: Can we make this a sticky?
Great suggestion, seconded. |
|
| Author: | Archangel007 [ Tue Nov 27, 2007 7:11 am ] |
| Post subject: | |
Please! |
|
| Author: | Maxi23 [ Tue Nov 27, 2007 7:34 am ] |
| Post subject: | |
Came in handy for me
Needed to know whether the Swift and Mini would fit side by side in the garage. |
|
| Author: | mickmini [ Wed Feb 06, 2013 9:00 pm ] |
| Post subject: | |
Made this a sticky because it comes in so handy, and frankly i am sick of searching for it myself 
cheers michael |
|
| Author: | Panthersteve [ Thu Jul 11, 2013 8:52 am ] |
| Post subject: | |
Hi everyone I have "unstickied" this thread as it has now been replaced by the one I have done by combining all the info available. I am leaving this thread locked so that there is only one active thread on mini dimensions. If I have done the wrong thing please let me know. Cheers Steve |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|