ausmini
https://www.ausmini.com/forums/

Replacment Conrods cooper s.
https://www.ausmini.com/forums/viewtopic.php?f=2&t=38377		 Page 1 of 1
Author:  Gimpy_72 [ Mon Dec 03, 2007 9:59 am ]
Post subject:  Replacment Conrods cooper s.
Looking for replacement Cooper S conrods.

Just wondering if there are different conrods with the same specs as a Cooper S conrod?

I read about using a chevy conrod?

If you can use different rods, can someone please help me locate them.
Author:  Lillee [ Mon Dec 03, 2007 10:25 am ]
Post subject: 
Why not just buy Cooper S conrods?
Author:  TK [ Mon Dec 03, 2007 10:28 am ]
Post subject: 
1275 Cooper 'S's rods are either 177s or 521s.
The only other choice you have are 1275 Midget rods 625s.
OR
you can go after market Carello etc etc but expect to pay big dollars.
RE: Chevy rods. Maybe your mistaken. You can use some Chev rod bolts but I doubt if you can use the rod. I maybe wrong, I've never heard of it.
Author:  Lillee [ Mon Dec 03, 2007 11:07 am ]
Post subject: 
AEG521's can be found in Morris 1100s engines as well. Rods are going for about $200 any condition so look out for them.
Author:  drmini in aust [ Mon Dec 03, 2007 6:28 pm ]
Post subject: 
I've not heard of using Chevy rods, but my 1412 motor build is using ARP Big Block Chevy rod bolts and nuts.
I normally use BigBlock Ford ones (less work to fit), but this set of Chevys has been sitting here for years, so in they go! :lol:

There are other aftermarket rods than Carrillo. Graham Russell has just sourced some very nice ones from NZ. Cheaper, but pricing I don't know.
Author:  Gimpy_72 [ Tue Dec 04, 2007 9:27 am ]
Post subject:  Thanks Guys
Thanks Guys, i'm looking at rebuilding my 1275 LS. I think i will contact Graham about the rods. Thanks Again.
Author:  Lillee [ Tue Dec 04, 2007 12:57 pm ]
Post subject: 
From memory about $200 per rod or something like that
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/