I have the opportunity to grab a sandblasting cabinet. Its not massive but good enough to do some bits and pieces.

In terms of wheels im not entirely sure yet....will find out later.

I just wanted to know if people are at all interested in having some small sandblasting work done, and at not too dear prices

If so I might grab 'er!

_________________
[Maverick] 1971 Mini K

Could you fit a Clutch housing and a Gearbox Shell in it

_________________
Stop Licking the Dog...I Don't Care Who Started It

Ill check the dimensions gafs...and then let you know

_________________
[Maverick] 1971 Mini K

if i had a garage, i would take it in a shot. very handy bit of gear to have around.

_________________
the world is a book, and those who do not travel read only a page
66 Mini Minor sponsored by http://www.lifeonthehedge.com.au/ The Dog Harness Specialists
It was a pleasure ausmini. I'll miss all you misfits and reprobates

well ive got a garage.....so thats no problem.

_________________
[Maverick] 1971 Mini K

lucky bastard

_________________
the world is a book, and those who do not travel read only a page
66 Mini Minor sponsored by http://www.lifeonthehedge.com.au/ The Dog Harness Specialists
It was a pleasure ausmini. I'll miss all you misfits and reprobates

I'v got a Double... and Marcia has her nose up still with Morris sitting out of the rain nice and comfy


Sorry guys

_________________
Stop Licking the Dog...I Don't Care Who Started It

waddya mean guys, i'm the only one in this discussion without the garaage

_________________
the world is a book, and those who do not travel read only a page
66 Mini Minor sponsored by http://www.lifeonthehedge.com.au/ The Dog Harness Specialists
It was a pleasure ausmini. I'll miss all you misfits and reprobates

Wait thier will be more

_________________
Stop Licking the Dog...I Don't Care Who Started It

now you're gloating

_________________
the world is a book, and those who do not travel read only a page
66 Mini Minor sponsored by http://www.lifeonthehedge.com.au/ The Dog Harness Specialists
It was a pleasure ausmini. I'll miss all you misfits and reprobates

Yer maybe...I use to have a Garage that I could not use in the old house,,,it had a driveway 45degree angle and 2 meters long. No clearance for a car at all.
So ever job I had to do was on the grass When you drop something you will never find it till your puching the mower...another hole in the fibro Opps sorry Dear

_________________
Stop Licking the Dog...I Don't Care Who Started It

Gafmo,

I've got a sandblast cabinet from Hare & Forbes ( a top-loading one on a stand, rather than the larger side-load type).

I reckon I could fit a clutch cover in mine. A gearbox casing would probably just fit but would probably be too heavy and too awkward to do.

KB

I made my own cabnet. Used an old oil tank for house heaters. They come with legs and all. Used a drill and jigsaw to make the necessary holes and stuff, bought a cheap sandblasting kit and I'm away like Flyn. In hind sight I should mave made the door a full side panel then I could have fitted the bonnet in!!

PS: you need a fn big compressor to make it effective, I ended running a 16cfm straight from the tank with an inline moisture trap, now it works well!!

....Three Garages(one double), and two industrial sheds where i live....

_________________
[Maverick] 1971 Mini K

just adding to the discussion so that mickmini doesn't get lonely. I can only dream of a garage at the mo