hey guys, still pulling apart this little 1098, how can one tell wat size the su is just by looking at it? is it possible or do i look around for a ruler with inches on it lol?

cheers,
matt

_________________
Here am I sitting in my tin can far above the Moon
Planet Earth is blue and there's nothing I can do...



“A turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster.” - Jeremy Clarkson

Have a look at the front of it (where it bolts to the manifold ) , if the two stud holes are vertically opposed it's an 1 1/4" , if they are diagonally opposed , it's an 1 1/2" and if there are 4 stud holes in the corners of a square pattern then it's an 1 3/4" .

_________________

[img][img]http://i199.photobucket.com/albums/aa55/mattyq87/DSC00264.jpg[/img][/img]

ok, so i didnt really know what i was looking for so i took a picture.... lol

cheers,
matt

_________________
Here am I sitting in my tin can far above the Moon
Planet Earth is blue and there's nothing I can do...



“A turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster.” - Jeremy Clarkson

Assuming that's looking staright down, 1 1/4".