If the forks are not worn and you are not replacing them, I'd leave them in.
Just spray them with oil or WD40 after washing, or the shafts will rust...
| ausmini https://www.ausmini.com/forums/ |
|
| Worth pulling out the selector forks? https://www.ausmini.com/forums/viewtopic.php?f=2&t=38782 |
Page 1 of 1 |
| Author: | Wombat [ Sun Dec 16, 2007 6:33 pm ] |
| Post subject: | Worth pulling out the selector forks? |
Last box I pulled apart it was a fiddle trying to get the selector forks back. I've got the current box stripped down with just the forks left - they look pretty good - in fact the whole lot looks excellent and apart from the sludge in the bottom and the fines jambed in the oil strainer I'd say not long overhauled - I'm going to take it down to the Bro-in-laws carwash over Christmas and give it one thorough clean inside and out and wonder if I can leave the selectors in or take them out. |
|
| Author: | drmini in aust [ Sun Dec 16, 2007 6:42 pm ] |
| Post subject: | |
If the forks are not worn and you are not replacing them, I'd leave them in. Just spray them with oil or WD40 after washing, or the shafts will rust...
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|