I've not had trouble with the locktabs on the crownwheel, but if I don't have em I've used Loctite 262, no problems.
I'd just rub the rust off as much as poss, then oil it...
| ausmini https://www.ausmini.com/forums/ |
|
| Dumb questions as I feel my way in unknown territory https://www.ausmini.com/forums/viewtopic.php?f=2&t=38791 |
Page 1 of 1 |
| Author: | Wombat [ Sun Dec 16, 2007 9:01 pm ] |
| Post subject: | Dumb questions as I feel my way in unknown territory |
Number one - Lock tabs or Loctite for the Crown Wheel retaining bolts? Number two - there is some surface rust on the crown wheel - clean it up or just coat in oil? |
|
| Author: | drmini in aust [ Sun Dec 16, 2007 9:04 pm ] |
| Post subject: | |
I've not had trouble with the locktabs on the crownwheel, but if I don't have em I've used Loctite 262, no problems. I'd just rub the rust off as much as poss, then oil it...
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|