Just buy the screw on adapter thingy and a filter.
Bolts straight on.
| ausmini https://www.ausmini.com/forums/ |
|
| convert from cartridge to canister??? https://www.ausmini.com/forums/viewtopic.php?f=2&t=38885 |
Page 1 of 1 |
| Author: | mattsmadmini [ Wed Dec 19, 2007 12:57 pm ] |
| Post subject: | convert from cartridge to canister??? |
hey all, started pulling apart my 1098 this morning and came across the original oil filter, as pretty as it is.... what is the easiest way to convert to the more modern screw on canister type oil filter? cheers, matt |
|
| Author: | Harley [ Wed Dec 19, 2007 1:13 pm ] |
| Post subject: | |
Just buy the screw on adapter thingy and a filter. Bolts straight on.
|
|
| Author: | poeee [ Wed Dec 19, 2007 1:15 pm ] |
| Post subject: | |
All you need is the spin on head for the engine. Minisport sell a kit... http://minisport.com.au/prod1003.htm |
|
| Author: | mattsmadmini [ Wed Dec 19, 2007 1:16 pm ] |
| Post subject: | |
cheers guys |
|
| Author: | Mike_Byron [ Wed Dec 19, 2007 4:24 pm ] |
| Post subject: | |
The studs it uses to bolt on the screw on are a different length. Make sure you get those as well as the appropriate new gasket. The oil line bolts straight up but be careful with it. Its a thin metal material and its kinks and breaks easily. Get it in position and tighten it down at either end as you go. |
|
| Author: | drmini in aust [ Wed Dec 19, 2007 4:45 pm ] |
| Post subject: | |
Bugger the studs, I just use 2 3/8 UNC starter bolts.. perfect. 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|