ausmini
https://www.ausmini.com/forums/

Heater Refurb
https://www.ausmini.com/forums/viewtopic.php?f=2&t=3896		 Page 1 of 1
Author:  mickmini [ Sun Jan 09, 2005 6:31 pm ]
Post subject:  Heater Refurb
"]
gafmo wrote:
Engine bay heater largest peice is 15 inches
Image

If also to do Shock brakets if that Okay most of it has been wire wheeled
Anytime is fine for me also


I have one of these that i want to do up too. The foam is stuffed on the little flappy things like on gafmos one here.

Anyone know what foam to get?
michael
Author:  gafmo [ Sun Jan 09, 2005 9:47 pm ]
Post subject: 
How rude you pinched my picture... :lol:
I was going to use Kevin's (1310/71) sandblaster but thier was no way it was going to get under the section under it... :twisted:
So I'm going to pay someone to do it or dip it.
Regaring to the foam.....Welll shie I just don't know I was just going to go down to Clark rubber and see what they had first...I'd say tight course foam and heat gun it on realy..."Shrug of the shoulders"
Author:  drmini in aust [ Sun Jan 09, 2005 9:57 pm ]
Post subject: 
I got 2 to do. 8)
Polyurethane foam is probably best if you can get it. Oil won't stuff it up. But the old foam is just 40 year old rubber sponge.. so anything will work! :lol:
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/