| ausmini https://www.ausmini.com/forums/ |
|
| Tell me where to go https://www.ausmini.com/forums/viewtopic.php?f=2&t=39144 |
Page 1 of 1 |
| Author: | 3DJ [ Wed Feb 13, 2008 1:12 pm ] |
| Post subject: | Tell me where to go |
Thought the title might get a few people looking 
I have posted previously on this subject but didnt realy get any response. I will soon receive my pulsar dizzy however i am not confident that i will be able to make the modifications myself. Is there anyone that someone may know that i can take it to in the Geelong / Melbourne area that would be able to do this at a reasonable cost? Any suggestions would be appreciated. |
|
| Author: | Dylans Clubby [ Wed Feb 13, 2008 1:33 pm ] |
| Post subject: | |
i think its called 123Ignitions, they are in melbourne as far as i know. but i think they do their own dizzys, not mods... tere is a "greasy experience" in one of watto's TME's that has the details. same issue has an ad i think also, there are some details here http://www.ausmini.com/forums/viewtopic.php?t=12376 but is this the conversion you are not confident of doing yourself? hope this helps, dylan |
|
| Author: | 3DJ [ Wed Feb 13, 2008 1:38 pm ] |
| Post subject: | |
Yep, its the conversion that i am not confident that i will be able to do. 
|
|
| Author: | Dylans Clubby [ Wed Feb 13, 2008 1:41 pm ] |
| Post subject: | |
ok... whereabouts did you say you were in melbourne? i remember you did tell me at the fireworks night but i've since forgotten... the ausmini crash got in my head! |
|
| Author: | 3DJ [ Wed Feb 13, 2008 1:45 pm ] |
| Post subject: | |
Well, i am actually living in Geelong at the moment, so Geelong would be easier. I am however working in Melbourne, also renovating a house up there, mostly i am around the western suburbs or as i said before, Geelong. How much do you think i should expect to pay for this type of work? |
|
| Author: | drmini in aust [ Wed Feb 13, 2008 1:48 pm ] |
| Post subject: | |
I would just post it to Russell Engineering in Sydney. he can not only mod it to fit, but sort the advance curve too. (02) 9630 2195 
|
|
| Author: | Dylans Clubby [ Wed Feb 13, 2008 2:30 pm ] |
| Post subject: | |
ah ok... not sure where to go to in geelong, we dont ahve a mini guy anymore. but in western subs try scott at minitopia (user name: BALLISTIC) or, as suggested, post to GR |
|
| Author: | BALLISTIC [ Wed Feb 13, 2008 9:59 pm ] |
| Post subject: | |
Dylan's Clubby wrote: ah ok... not sure where to go to in geelong, we dont ahve a mini guy anymore.
but in western subs try scott at minitopia (user name: BALLISTIC) or, as suggested, post to GR I can do the mods required but i cant curve the dissy to suit but i do have a place that can take care of that, anyways just a phone call away
|
|
| Author: | 3DJ [ Thu Feb 14, 2008 9:50 am ] |
| Post subject: | |
How important is it to get the advance curve sorted out? Is the a big difference in performance? It's not in the 'How To' thread on elec ignition. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|