lilmatti_69 wrote:
to re upholster 78 clubman seats,
That's a lot of seats to reupholster
| ausmini https://www.ausmini.com/forums/ |
|
| Material To re upholster https://www.ausmini.com/forums/viewtopic.php?f=2&t=39521 |
Page 1 of 1 |
| Author: | lilmatti_69 [ Fri Feb 22, 2008 7:54 pm ] |
| Post subject: | Material To re upholster |
does anyone know how much meters of vinyl you would approximately need to re upholster 78 clubman seats, the 2 front seats, back seat, front door cards, rear door cards and back parcel shelf. the front seats are the high back variety. Cheers |
|
| Author: | Panthersteve [ Fri Feb 22, 2008 10:14 pm ] |
| Post subject: | Re: Material To re upholster |
lilmatti_69 wrote: to re upholster 78 clubman seats,
That's a lot of seats to reupholster
|
|
| Author: | minidrifter [ Fri Feb 22, 2008 10:19 pm ] |
| Post subject: | |
my GUESS would be about 20 to do everything your thinking about. however ifd you ask me again in a few months i'll have a more precise answer, im re-trimming it all in leather. |
|
| Author: | lilmatti_69 [ Sat Feb 23, 2008 12:29 am ] |
| Post subject: | |
leather quite expensive for my taste... around $50 - 60 per meter |
|
| Author: | the bean [ Sat Feb 23, 2008 10:03 am ] |
| Post subject: | |
im doing the same thing to my car atm 
|
|
| Author: | lilmatti_69 [ Sat Feb 23, 2008 10:33 am ] |
| Post subject: | |
how much fabric have you purchased? |
|
| Author: | the bean [ Sat Feb 23, 2008 10:44 am ] |
| Post subject: | |
thats what im trying to work out |
|
| Author: | WantOne [ Sat Feb 23, 2008 4:30 pm ] |
| Post subject: | |
I bought 30M and still have about 20M left. Still got to door the doors, reckon they're about 3.5 - 4M of vinyl. 20M will do it easy. Remember to keep everything close together when drawing out the new pattern pieces. If you cut it carefully you should have enough big bits left over to keep for repairs. |
|
| Author: | lilmatti_69 [ Sat Feb 23, 2008 5:51 pm ] |
| Post subject: | |
how would you do the patterns on the door cards??? im buying my vinyl 2moro 15-20M should be enough. do you put that thin foam behind the vinyl on the door cards? |
|
| Author: | minidrifter [ Sat Feb 23, 2008 6:18 pm ] |
| Post subject: | |
yep, and the thicker stuff on the inserts, thats something ive already learnt
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|