Hi all,
Apart from one not having the breather, does anyone know if they can be interchanged?
they are different is a few areas, one being where the oil is fed into the bearing on the idler gear.
thanks
| ausmini https://www.ausmini.com/forums/ |
|
| clutch housings is there a difference between these two https://www.ausmini.com/forums/viewtopic.php?f=2&t=39584 |
Page 1 of 1 |
| Author: | Boostedmini [ Mon Feb 25, 2008 7:26 am ] |
| Post subject: | clutch housings is there a difference between these two |
Hi all, Apart from one not having the breather, does anyone know if they can be interchanged? they are different is a few areas, one being where the oil is fed into the bearing on the idler gear.
thanks |
|
| Author: | drmini in aust [ Mon Feb 25, 2008 7:40 am ] |
| Post subject: | |
Grant, There are variations in the A series 4 synchro ones with breathers on too, there were a few different baffles used to minimise oil being thrown up into the breather. The last of the non-breather ones had the same idler bearing size as these, and could be used instead. But as you can see there is little oilfeed provided to the idler bearing. I would always use the breather one, on a 4 synchro box. If you need any housings with breathers, come see me as I have a fair selection.. 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|