is it a front or rear donut/trumpet
if they are out and the donut wont let go of the trumpet just replace them with a new donut and a set of high lows!! Remember you must do the same to the other side.
Oh by the way what state are you in
| ausmini https://www.ausmini.com/forums/ |
|
| suspension troubles https://www.ausmini.com/forums/viewtopic.php?f=2&t=40176 |
Page 1 of 1 |
| Author: | smee [ Fri Mar 14, 2008 9:44 pm ] |
| Post subject: | suspension troubles |
i'm haveing great trouble getting the trumpet seperated from the rubber cone i've got them out of the subframe ,but this may be makeing the job harder. the thread insidi is stripped so a compressing tool is no help.please if any one has the trick i would love to know it. |
|
| Author: | frednutz&co [ Fri Mar 14, 2008 10:02 pm ] |
| Post subject: | |
support the donut spray it well with CRC let it soak and punch it out with a big drift carefully |
|
| Author: | BALLISTIC [ Fri Mar 14, 2008 10:16 pm ] |
| Post subject: | |
is it a front or rear donut/trumpet
if they are out and the donut wont let go of the trumpet just replace them with a new donut and a set of high lows!! Remember you must do the same to the other side.
Oh by the way what state are you in
|
|
| Author: | AEG163job [ Fri Mar 14, 2008 11:09 pm ] |
| Post subject: | |
BALLISTIC wrote: Oh by the way what state are you in
A state of frustration gauging by his suspension problem 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|