michael wrote:
I am using tranny fluid
how did you juice him/her?
sorry, back to the topic...
| ausmini https://www.ausmini.com/forums/ |
|
| dash pot oil https://www.ausmini.com/forums/viewtopic.php?f=2&t=40363 |
Page 1 of 1 |
| Author: | mini-dunger [ Fri Mar 21, 2008 5:24 pm ] |
| Post subject: | dash pot oil |
Hi guys I am using tranny fluid can anyone tell me how much or to what level I have to fill it? Do I take the plunger out and pour it in or do I just undo the top and pour it in ontop? any help will be appreciated Michael |
|
| Author: | Mick [ Fri Mar 21, 2008 5:29 pm ] |
| Post subject: | |
It's meant to simply fill the tube. If you overfill it, the excess will a) blow out the top as you drive. Or b) drain down on top of the piston and then into the manifold. It doesn't really matter, get it within 1/2 an inch from the top of the inner piston tube and it will find it's own happiness. If you overfill it, it will still find it's own level one way or another. |
|
| Author: | 1018cc [ Fri Mar 21, 2008 5:30 pm ] |
| Post subject: | |
In addition to what Mick said, leave the little "tube" in there as you fill it, it takes up space and oil will dribble out if you fill it to the correct level and then put it back in. |
|
| Author: | Dylans Clubby [ Fri Mar 21, 2008 6:00 pm ] |
| Post subject: | |
michael wrote: I am using tranny fluid
how did you juice him/her?
sorry, back to the topic... |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|