| ausmini https://www.ausmini.com/forums/ |
|
| seat retrim $ ? https://www.ausmini.com/forums/viewtopic.php?f=2&t=40498 |
Page 1 of 2 |
| Author: | MUNKEY [ Wed Mar 26, 2008 10:45 pm ] |
| Post subject: | seat retrim $ ? |
G'day, anyone done up there interior latley.. ive just come up from the shed after doing abit more body work to the front end of the clubby and i think im going to have my seats re-upholsterd to compliment the freash rust free paintwork!, it will be like a new mini then! Can anyone throw a ballpark figure at me to have the set of front & rear seats re done in a normal cloth type black trim 
munk. |
|
| Author: | lilmatti_69 [ Wed Mar 26, 2008 11:21 pm ] |
| Post subject: | |
hmm not sure about cloth but got quoted for vinyl around $800-$900. |
|
| Author: | MUNKEY [ Wed Mar 26, 2008 11:27 pm ] |
| Post subject: | |
ok.. i wonder which is generally cheaper between cloth & vinyl ? |
|
| Author: | BigGig [ Thu Mar 27, 2008 7:35 am ] |
| Post subject: | |
It really does depend on who does it I'm afraid. I was quoted anywhere between $1000-$3500 for vinyl (all seats and door cards) I was quoted between $3000 -$7000 for full leather. Some fabrics are alot more expensive than vinyl or even leather. I was warned against the suede look microfibre as it is not UV stablised and will deteriorate quite badly. But things may have changed since last year. In the end I was very lucky and I used an aircraft upholsterer here in Perth who had the contract to do the fleet of aircraft I maintain. Because I gave him 40 aircraft to do I got a full leather interior for $1600. 
Sorry just bragging! Ring up a few upholstery places and get some quotes. Then when you have isolated a couple of then go and see the work they do. Get them to give you fabric samples and pick one you like rather than the one they want to sell you. I would say at a guess $800 - $1200 should give you a good range to choose from. Cheers, Gig |
|
| Author: | clubby757 [ Thu Mar 27, 2008 11:35 am ] |
| Post subject: | |
BigGig wrote: I was quoted anywhere between $1000-$3500 for vinyl (all seats and door cards)
 oh goshh.. Im not looking forward to doing my interior.. I need everything from the carpet up!.. including new vinyl on the dash pads 
|
|
| Author: | Wombat [ Thu Mar 27, 2008 12:03 pm ] |
| Post subject: | |
A mate of mine who makes sheep skin seat covers for a living from home is telling me to do my own upholsery - says he started out making vinyl seat covers on his mum's sewing maching and it is dead easy( so he says) When the time comes he said he'll give some pointers if I need it but he reacons any dummy can do it - all you need is a good paper pattern 
|
|
| Author: | lilmatti_69 [ Thu Mar 27, 2008 12:07 pm ] |
| Post subject: | |
i got quoted from a guy on here, he lives in chipping norton and has done minis before, try doing a search for his number. |
|
| Author: | Hanra [ Thu Mar 27, 2008 12:43 pm ] |
| Post subject: | |
My back seat cost $450 in vinyl back in 00.... |
|
| Author: | 1018cc [ Thu Mar 27, 2008 1:04 pm ] |
| Post subject: | |
I got my fronts and rear seat recovered in vinyl with new foam for $950. Good job but would hate to think how much it would cost if the WHOLE lot had to be done. That was a couple of years ago though. |
|
| Author: | Roundie [ Thu Mar 27, 2008 4:44 pm ] |
| Post subject: | |
A mate and i redid my whole interior including seat doors,dash..........everything in leather and them outsourced the carpet and it cost me a total of $650 we did the lot ourselves so you save a fair bit and it wasn't that hard
|
|
| Author: | cookie720 [ Thu Mar 27, 2008 4:55 pm ] |
| Post subject: | |
did everything myself and cost me however much the vinyl cost maybe 60 bucks |
|
| Author: | Ziegech [ Thu Mar 27, 2008 6:26 pm ] |
| Post subject: | |
i got all my seats and my roof trim for about 700 at C&N auto in sunshine(melbourne) did a top job if u want details i can pm you |
|
| Author: | Kennomini [ Thu Mar 27, 2008 6:28 pm ] |
| Post subject: | |
I got my front seats and rear seat all done in 2 tone cloth + foam raisers on the front seats(more bucket like) for $650. |
|
| Author: | buztoy [ Thu Mar 27, 2008 6:45 pm ] |
| Post subject: | |
re trimmed my cup seats in vynal for 100 bucks, its not hard to get a good result but anything up and i would say its near imposible for anyone with out year of exsperiance under their belt, they dont look bad and dont look tacky either but its just lots of mearsuring and even more measuring, and dont use white vynal you can see a safety pin hole from the moon, |
|
| Author: | Mick [ Thu Mar 27, 2008 6:46 pm ] |
| Post subject: | |
I've got a full set of seats over here for my car, I'm going to pick apart each panel and copy them in new MG black. I'll sew them together on the home machine with some quality cotton and see how it goes. If it doesn't look so (sew??) hot then I'll give it another shot...it doesn't look like rocket science if you have the pattern to go off. Different story if you need a custom pattern made.. |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|