Ausmini
It is currently Sun Jul 20, 2025 4:03 pm

All times are UTC + 10 hours




Post new topic Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Sat Apr 05, 2008 6:47 am 
Offline
Slow-Po
User avatar

Joined: Fri Jul 08, 2005 8:56 pm
Posts: 9979
From today's paper, a timely reminder to be careful when under your car. 8)

Quote:
THE car jack has become one of the most dangerous products on the market, with coroners' figures showing more than a third of deaths blamed on broken or mishandled products were due to wrongly used jacks.

Between 2000 and 2007 81 deaths in Australia were linked to misused, badly maintained or faulty consumer products. Of those, 29 involved the incorrect use of car jacks, data from the National Coroners Information System shows.

Another 19 deaths involved other vehicle equipment, such as faulty brakes - which led to six deaths - seat belts, LPG tanks and petrol caps. Nine children died due to broken or misused prams, strollers, or baby baths.

Three people were killed by faulty gas heaters, and two deaths were blamed on poorly maintained air-conditioners. Two people died in spa baths, including a young girl whose long hair was sucked into the bubble jets.

The report from the National Coroners Information System showed 2002 was the worst year, with 21 deaths. The study did not encompass all product-related deaths, as some were not classified as such on the system.

Most vehicle equipment deaths were blamed on poor maintenance, but the car jack-related deaths were all due to misuse. Some victims used them to work under their cars, and some chose jacks that were too flimsy for their vehicle.

In some cases they used car jacks to work under trucks, boats or caravans. The vehicles fell or rolled, crushing or suffocating them. All were men, aged between 30 and 60, and most were working at home.

In one case a man used jacks despite written warnings. He took safety precautions but "his jacks were not appropriate for working beneath the car and there was nothing to prevent the vehicle rolling back slightly", the coroner found.

In another, a man failed to secure the car so it rolled forward, fell off the wooden blocks and landed on him.

Deaths were most common in Victoria, followed by NSW.

Jack Haley, the manager of motoring research at the NRMA, said accidents could be easily avoided. "Using a non-approved jack is one problem, as is using some equipment that's not designed for lifting vehicles or not using proper stands … People shouldn't get under a vehicle until it's securely raised. Even a light vehicle is 800 or 900 kilos. Obviously you shouldn't use a jack beyond it's weight capability."

Coroners also issued grave warnings about the use of prams, cots and baby baths. The five baby bath deaths were blamed on "risk-taking behaviour", involving parents who mistakenly believed they could leave their baby in the water unsupervised.

One cot death was due to inexperienced parents' ignorance of the dangers presented by cots that were not in their original condition.

Thee Victorian coroner Graeme Johnstone said the baby's death "highlights the necessity to educate forthcoming parents, grandparents and carers … of the danger in purchasing second-hand nursery equipment".

_________________
One should never skimp on the zip ties.

Image


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 05, 2008 8:42 am 
Offline
1098cc
1098cc
User avatar

Joined: Wed Aug 04, 2004 6:21 am
Posts: 1788
Location: Wullingtun, Unzud
Good points. Most of the equipment on the market, even chinese stuff, isn't going to be stressed by a mini and catastrophic failures are thankfully very rare. However, I always think before I get under the car "Would I be happy for one of the kids to be under there?"


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 05, 2008 10:38 am 
Offline
1275cc
1275cc
User avatar

Joined: Sat Jun 09, 2007 2:01 pm
Posts: 3293
Location: melbourne ferntreegully
jack it up then use good solid blocks or jack stands and then only get under for the shortest time possible.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 05, 2008 11:07 am 
Offline
998cc
998cc
User avatar

Joined: Tue Sep 19, 2006 8:58 pm
Posts: 614
Location: Wyndham Green, Vic!
frednutz&co wrote:
jack it up then use good solid blocks or jack stands and then only get under for the shortest time possible.


....And for F**ks sake make sure the car is on a level surface and can't roll back or forward! :?

_________________
-James.

Toyota 4EFTE Powered Minivan.
102 Kw @ The Front Wheels....Oh What a Feeling!


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 05, 2008 11:18 am 
Offline
1275cc
1275cc
User avatar

Joined: Mon Sep 19, 2005 4:57 pm
Posts: 3635
Location: Gulgong
Just for a change its not me - the apparently elected Ausmini Occupational Health and Safety officer - preaching.

It really is a topic that should be bumped every three months or so.

Mike


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 05, 2008 11:37 am 
Offline
1275cc
1275cc
User avatar

Joined: Sat Jun 09, 2007 2:01 pm
Posts: 3293
Location: melbourne ferntreegully
sorry meant to add that :oops:


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 05, 2008 1:03 pm 
Offline
1098cc
1098cc
User avatar

Joined: Wed Aug 04, 2004 6:21 am
Posts: 1788
Location: Wullingtun, Unzud
One thing not often mentioned it that with the car on four jacks stands, it doesn't take much to rock it off onto you - like cranking on a tough nut. Working with the car on four jack stands, no matter how tough, is not recommended.


Probably common sense to most people, anyway.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 05, 2008 1:24 pm 
Offline
1275cc
1275cc
User avatar

Joined: Thu Jun 08, 2006 9:34 pm
Posts: 2372
Location: Adelaide
if your changing a tyre as soon as you get it off stick it under the car somewhere.

_________________
blokeinamoke wrote:
Yep Mokes are ugly - but Moke owners know that. Its like ugly women - she may be a dog but you know your going to get some :wink:


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 05, 2008 2:11 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
Angusdog wrote:
One thing not often mentioned it that with the car on four jacks stands, it doesn't take much to rock it off onto you - like cranking on a tough nut. Working with the car on four jack stands, no matter how tough, is not recommended.


Probably common sense to most people, anyway.

2 ramps at front and 2 jackstands is pretty bulletproof. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC + 10 hours


Who is online

Users browsing this forum: Bing [Bot] and 61 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.