The wife's 1293 (Perry 3-1 freeflow, twin HS4s) had a noisy Lukey on, I replaced it with an old RC40 off mine, and it's definitely going harder (and more quietly).
| ausmini https://www.ausmini.com/forums/ |
|
| Exhaust https://www.ausmini.com/forums/viewtopic.php?f=2&t=40801 |
Page 1 of 1 |
| Author: | lilmatti_69 [ Sun Apr 06, 2008 1:45 pm ] |
| Post subject: | Exhaust |
Hey It's time for a new exhaust and was wondering if you guys have can suggest anything. I was thinking of extractors and standard exhaust all the way through. Nothing to special How much will i be expecting to pay and do you guys have any connections in Sydney? Cheers |
|
| Author: | Mick [ Sun Apr 06, 2008 1:52 pm ] |
| Post subject: | |
My 1275LS has a set of extractors and factory standard (for the LS) cat's bum exhaust. I tell you a set of extractors on the stock system isn't anything spectacular, for all I know they may as well not be there... EDIT: as for cost, the extractors can be had for below 200, and the whole system for 340ish. This is the maniflow system I saw 3 months back at a local supplier |
|
| Author: | sgc [ Sun Apr 06, 2008 3:19 pm ] |
| Post subject: | |
If you're not going to put an inch and a half or larger exhaust on, extractors are worthless IMHO. You can't go wrong with inch and three quarters with a good 3-1 set of extractors (on a smallbore, LCB on a bigbore). Sounds great, worthwhile performance boost. My 5c. |
|
| Author: | lilmatti_69 [ Sun Apr 06, 2008 4:03 pm ] |
| Post subject: | |
sgc wrote: If you're not going to put an inch and a half or larger exhaust on, extractors are worthless IMHO. You can't go wrong with inch and three quarters with a good 3-1 set of extractors (on a smallbore, LCB on a bigbore). Sounds great, worthwhile performance boost.
My 5c. That's exactly what i was think. Nothing bigger then 1.3/4 in through with extractors |
|
| Author: | gafmo [ Sun Apr 06, 2008 4:16 pm ] |
| Post subject: | |
I have LCB (perry) with 1 3/4" pipes to a 2" coupled with a HIF44 crab and nice came. Exhaust is loud but its on the wifes daily drive Good starting point is a LCB 1 3/4" pipe with a RC40 muffler |
|
| Author: | drmini in aust [ Sun Apr 06, 2008 4:53 pm ] |
| Post subject: | |
The wife's 1293 (Perry 3-1 freeflow, twin HS4s) had a noisy Lukey on, I replaced it with an old RC40 off mine, and it's definitely going harder (and more quietly).
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|